Unibo Team Leader: Prof. Roberto Guerrieri, Centro di Ricerca sui Sistemi Elettronici per l'Ingegneria dell'Informazione e delle Telecomunicazioni "Ercole De Castro" – ARCES
Electronic devices of the latest generations, being those integrated circuits or discrete components, are often required to operate in harsh environmental conditions, where the temperature may reach over hundred degrees centigrade. Obviously, this has negative impact on several parameters of the electronic devices, ranging from slow-down and transient, recoverable errors to permanent failures and device breakdown. To complicate the picture, electronic components tend to get warmer on their own as they operate, due to the fact that the power drawn by the devices from the power supply is dissipated by Joule effect.
As time passes, heat and temperature management is becoming increasingly problematic, for reasons ranging from economical to technological. Packages that are able to sustain high temperatures are very expensive, and so are heat-sinks and cooling systems. In addition, high operating temperatures tend to cause malfunctioning of circuits and components, thus impacting the reliability of the electronic products which incorporate such devices.
The development of new, thermal-aware design paradigms can no longer be postponed if the goal is to enable designers to fully exploit the electronic technologies of the future, being those CMOS or alternative to CMOS. The thermal problem has several facets, thus it needs to be addressed in a comprehensive manner. The THERMINATOR projects will address the following major challenges: 1) To devise innovative thermal models usable at different levels of abstraction, and to interface/integrate them into existing simulation and design frameworks. 2) To develop new, thermal-aware design solutions, customized for the different technologies and application domains of interest. 3) To enhance existing EDA solutions by means of thermal-aware add-on tools that will enable designers to address temperature issues during their daily work and with their usual design flows.
Coordinator
STMicroelectronics S.r.l. (Italy)
Other participants
ALMA MATER STUDIORUM-UNIVERSITA DI BOLOGNA
- Centro di Ricerca sui Sistemi Elettronici per l'Ingegneria dell'Informazione e delle Telecomunicazioni "Ercole De Castro" – ARCES
- Resp. scientifico: Prof. Roberto Guerrieri
Infineon Technologies (Germany)
NXP Semiconductors Austria GmbH (Austria)
NXP Semiconductors GA GmbH (Germany)
NXP Semiconductors Netherlands BV (The Netherlands)
ChipVision Design Systems (Germany)
Gradient Design Automation (USA)
MunEDA (Germany)
Synopsys Armenia (Armenia)
Synopsys Switzerland (Switzerland)
Budapest University of Technology and Economics (Hungary)
Centre Suisse d'Electronique et de Microtechnique (Switzerland)
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung (Germany)
Interuniversitair Micro-Electronica Centrum-IMEC (Belgium)
Commisariat a l'Energy Atomique (France)
OFFIS (Germany)
Politecnico di Torino (Italy)
Start date 01/01/2010
End date 31/12/2012
Duration 36 months
Project cost 11.023.125 EURO
Project Funding 6.408.000 EURO
Subprogramme Area ICT-2009.3.2: Design of semiconductor components and electronic based miniaturised systems
Contract type Collaborative project