Andoni, Dorin; Brugo, Tommaso Maria; Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Zucchelli, Andrea; Mele, Mattia, A novel versatile axisymmetric specimen for mixed-mode I/II characterization of adhesively bonded joints, «INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES», 2025, 317, Article number: 113377 , pp. 1 - 13 [Scientific article]
Croccolo, D.; Ciric-Kostic, S.; De Agostinis, M.; Fini, S.; Mele, M.; Bogojevic, N.; Sindelic, V.; Olmi, G., An Experimental Study on the Fatigue Response of Hybrid Additively Manufactured 1.2343 Hot Work Steel - MARAGING Steel MS1, «FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES», 2025, 48, pp. 2162 - 2175 [Scientific article]Open Access
Brugo, Tommaso Maria; Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Zucchelli, Andrea; Mele, Mattia, Analysis and resolution of irregular breaks in tensile testing specimens fabricated via material extrusion, «RAPID PROTOTYPING JOURNAL», 2025, N/A, pp. N/A - N/A [Scientific article]
Mele, Mattia; Croccolo, Dario; Agostinis, Massimiliano De; Fini, Stefano; Šoškić, Zlatan; Bogojevic, Nebojsa; Ciric‐kostic, Snezana; Olmi, Giorgio, Effect of Build Orientation on the Fatigue Limit of CX Steel by Laser Powder Bed Fusion, «FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES», 2025, 48, pp. 2883 - 2893 [Scientific article]
Mele, Mattia; Milan, Gianmarco; Paffetti, Andrea; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Croccolo, Dario, Homogenization and artificial neural network prediction of elastic properties in triply periodic minimal surface structures, «PROGRESS IN ADDITIVE MANUFACTURING», 2025, N/A, Article number: 116397 , pp. N/A - N/A [Scientific article]
Mele, M.; Olmi, G., Tribology of threaded joints: Sustainable lubricants, in: Handbook of Bolts and Bolted Joints - Second Edition, Boca Raton, CRC Press, Taylor & Francis, 2025, pp. 109 - 123 [Chapter or essay]
Fini, S.; Croccolo, D.; de Agostinis, M.; Mele, M.; Olmi, G.; Scapecchi, C.; Tariq, M. H. B., A STUDY ON THE DEGRADATION OF PRE-APPLIED THREADLOCKERS UNDER EXTENDED EXPOSURE TO SEVERE HYGRO-THERMAL CONDITIONS, in: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2024, 1, pp. 1 - 5 (atti di: ASME 2024 Pressure Vessels and Piping Conference, PVP 2024, Bellevue, Washington, 29/07/2024) [Contribution to conference proceedings]
De Agostinis, M.; Croccolo, D.; Fini, S.; Mele, M.; Olmi, G.; Scapecchi, C.; Martini, J., ANALYSIS OF THE TRIBOLOGICAL BEHAVIOUR OF TITANIUM FASTENERS UNDER DIFFERENT TIGHTENING STRATEGIES, in: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, American Society of Mechanical Engineers (ASME), 2024, 1, pp. 1 - 7 (atti di: ASME 2024 Pressure Vessels and Piping Conference, PVP 2024, usa, 2024) [Contribution to conference proceedings]
Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara, Design of Special Equipment for the Mechanical Testing of Runway Light Fixtures, «MACHINES», 2024, 12, Article number: 41 , pp. 1 - 14 [Scientific article]Open Access
Fini, S.; Croccolo, D.; De Agostinis, M.; Olmi, G.; Paiardini, L.; Scapecchi, C.; Mele, M., Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments, «PROGRESS IN ADDITIVE MANUFACTURING», 2024, In Press, pp. 1 - 19 [Scientific article]Open Access
Pisaneschi, G.; Sancisi, N.; Mele, M.; Zucchelli, A., Improving soft robotic systems to enable hand mobility: integration of a pseudo-elastic bowden cable and digital twin-driven design, in: Proceedings of ESOMAT 2024, 2024, pp. 1 - 2 (atti di: ESOMAT 2024, Lecco, 26-30 August 2024) [Contribution to conference proceedings]
Gregorio Pisaneschi and Mattia Mele and Andrea Zucchelli and Maurizio Fiorini and Giampaolo Campana and Emanuela Marcelli and Achille Tarsitano and Elisabetta Lucchi and Laura Cercenelli, Numerical and experimental investigation of a 3D-printed PCU patient-specific cranial implant, «PROGRESS IN ADDITIVE MANUFACTURING», 2024, 9, pp. 299 - 313 [Scientific article]Open Access
Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Nassar S.; Olmi G.; Scapecchi C.; Khan M.Y.; Tariq M.H.B., Replacing non-renewable lubricants with vegetables oils in threaded joints, «JOURNAL OF ADVANCED JOINING PROCESSES», 2024, 10, Article number: S2666330924000505 , pp. 1 - 14 [Scientific article]Open Access
Porcaro, Rita; Fontana, Francesco; Ciotti, Michele; Mele, Mattia; Pisaneschi, Gregorio; Campana, Giampaolo; Zucchelli, Andrea; Fiorini, Maurizio, Warpage evaluation and mechanical characterisation of modified polyamide-6 specimens produced by Arburg plastic freeformer, «PROGRESS IN ADDITIVE MANUFACTURING», 2024, 10, pp. 2383 - 2395 [Scientific article]Open Access
Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara; Ciric-Kostic, Snezana; Bogojevic, Nebojsa; Soskic, Zlatan, AN EXPERIMENTAL STUDY ON HYBRID ADDITIVELY-MANUFACTURED MARAGING STEEL UNDER FATIGUE, in: J.F. Silva Gomes, EXPERIMENTAL MECHANICS IN ENGINEERING AND BIOMECHANICS - Proceedings ICEM20 - 20th International Conference on Experimental Mechanics, Porto 2-7 July 2023, INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, 2023, pp. 1095 - 1096 (atti di: ICEM20 - 20th International Conference on Experimental Mechanics, Porto (Portogallo), 2-7 Luglio 2023) [Contribution to conference proceedings]
