Foto del docente

Giorgio Olmi

Assistant professor

Department of Industrial Engineering

Academic discipline: ING-IND/14 Mechanical Design and Machine Construction

Publications

Ruolo editoriale nella rivista «Actuators»

Ruolo editoriale nella rivista «PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE»

Ruolo editoriale nella rivista «Transactions of Famena»

Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco, Influence of the interference level and of the assembly process on the shear strength of Loctite 648 anaerobic adhesive, «JOURNAL OF ADHESION», 2020, 96, pp. 90 - 112 [Scientific article]

Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco, Threaded fasteners with applied medium or high strength threadlockers: effect of different tightening procedures on the tribological response, «JOURNAL OF ADHESION», 2020, 96, pp. 64 - 89 [Scientific article]

Croccolo, Dario*; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco, Coating effect on the fatigue strength of a free cutting steel, «PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE», 2019, 233, pp. 7513 - 7524 [Scientific article]

Reggiani, Barbara; Olmi, Giorgio; Orazi, Leonardo; Tomesani, Luca; Fini, Stefano; Barozzi, Lorenzo; Pelaccia, Riccardo; Bandini, Michele, Effects of Surface Treatments on the Fatigue Response of High Strength Fasteners, in: Surface Modification Technologies, Zurich, Trans Tech Publications Inc., 2019, pp. 352 - 357 (KEY ENGINEERING MATERIALS) [Chapter or essay]

Reggiani, Barbara; Olmi, Giorgio, Experimental Investigation on the Effect of Shot Peening and Deep Rolling on the Fatigue Response of High Strength Fasteners, «METALS», 2019, 9, pp. 1 - 16 [Scientific article]

Croccolo, D.; De Agostinis, M.; Fini, S.; Funaioli, S.; Olmi, G.; Robusto, F.*, Experimentally validated structural finite element method analysis of a tibial intramedullary nail: Optimal choice of the contact settings, «PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART H, JOURNAL OF ENGINEERING IN MEDICINE», 2019, 233, pp. 193 - 206 [Scientific article]

De Agostinis M.; Croccolo D.; Fini S.; Olmi G.; Robusto F.; Bagnoli L., Finite element analysis of tapped thread joints: Setup of a computationally efficient modeling approach, in: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, American Society of Mechanical Engineers (ASME), 2019, 2, pp. 1 - 9 (atti di: ASME 2019 Pressure Vessels and Piping Conference, PVP 2019, usa, 2019) [Contribution to conference proceedings]

Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco, Influence of the interference level and of the assembly process on the shear strength of Loctite 648 anaerobic adhesive, in: Book of abstracts of the 5th International Conference on Structural Adhesive Bonding, Porto, Quântica Editora, Lda., 2019, pp. 175 - 175 (atti di: 5th International Conference on Structural Adhesive Bonding (AB2019), Porto, Portugal, 11-12 Luglio 2019) [Abstract]

Fini S.; De Agostinis M.; Croccolo D.; Olmi G.; Paiardini L.; Robusto F., Residual shank torque of bolted joints: A numerical investigation, in: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, American Society of Mechanical Engineers (ASME), 2019, 2, pp. 1 - 5 (atti di: ASME 2019 Pressure Vessels and Piping Conference, PVP 2019, usa, 2019) [Contribution to conference proceedings]

Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; Ćirić‐Kostić, Snezana; Morača, Slobodan; Bogojević, Nebojsa, Sensitivity of direct metal laser sintering Maraging steel fatigue strength to build orientation and allowance for machining, «FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES», 2019, 42, pp. 374 - 386 [Scientific article]

Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Vincenzi N., Steel screws on aluminium nuts: Different engagement ratio tapped threads compared to threaded inserts with a proper tolerance choice, «TRIBOLOGY INTERNATIONAL», 2019, 138, pp. 297 - 306 [Scientific article]

Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco, Threaded fasteners with applied medium or high strength threadlockers: effect of different tightening procedures on the tribological response, in: Book of abstracts of the 5th International Conference on Structural Adhesive Bonding, Porto, Quântica Editora, Lda., 2019, pp. 229 - 229 (atti di: 5th International Conference on Structural Adhesive Bonding (AB2019), Porto, Portugal, 11-12 Luglio 2019) [Abstract]