Ruolo editoriale nella rivista «Actuators»
Ruolo editoriale nella rivista «PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE»
Ruolo editoriale nella rivista «Transactions of Famena»
Andoni, Dorin; Brugo, Tommaso Maria; Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Zucchelli, Andrea; Mele, Mattia, A novel versatile axisymmetric specimen for mixed-mode I/II characterization of adhesively bonded joints, «INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES», 2025, 317, Article number: 113377, pp. 1 - 13 [articolo]Open Access
Croccolo, D.; Ciric-Kostic, S.; De Agostinis, M.; Fini, S.; Mele, M.; Bogojevic, N.; Sindelic, V.; Olmi, G., An Experimental Study on the Fatigue Response of Hybrid Additively Manufactured 1.2343 Hot Work Steel - MARAGING Steel MS1, «FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES», 2025, 48, pp. 2162 - 2175 [articolo]Open Access
Brugo, Tommaso Maria; Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Zucchelli, Andrea; Mele, Mattia, Analysis and resolution of irregular breaks in tensile testing specimens fabricated via material extrusion, «RAPID PROTOTYPING JOURNAL», 2025, N/A, pp. N/A - N/A [articolo]
Mele, Mattia; Croccolo, Dario; Agostinis, Massimiliano De; Fini, Stefano; Šoškić, Zlatan; Bogojevic, Nebojsa; Ciric‐kostic, Snezana; Olmi, Giorgio, Effect of Build Orientation on the Fatigue Limit of CX Steel by Laser Powder Bed Fusion, «FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES», 2025, 48, pp. 2883 - 2893 [articolo]Open Access
Mele, Mattia; Milan, Gianmarco; Paffetti, Andrea; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Croccolo, Dario, Homogenization and artificial neural network prediction of elastic properties in triply periodic minimal surface structures, «PROGRESS IN ADDITIVE MANUFACTURING», 2025, N/A, Article number: 116397, pp. N/A - N/A [articolo]
Mele, M.; Olmi, G., Tribology of threaded joints: Sustainable lubricants, in: Handbook of Bolts and Bolted Joints - Second Edition, Boca Raton, CRC Press, Taylor & Francis, 2025, pp. 109 - 123 [capitolo di libro]
Fini, S.; Croccolo, D.; de Agostinis, M.; Mele, M.; Olmi, G.; Scapecchi, C.; Tariq, M. H. B., A STUDY ON THE DEGRADATION OF PRE-APPLIED THREADLOCKERS UNDER EXTENDED EXPOSURE TO SEVERE HYGRO-THERMAL CONDITIONS, in: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, «PVP», 2024, 1, pp. 1 - 5 (atti di: ASME 2024 Pressure Vessels and Piping Conference, PVP 2024, Bellevue, Washington, 29/07/2024) [Contributo in Atti di convegno]
De Agostinis, M.; Croccolo, D.; Fini, S.; Mele, M.; Olmi, G.; Scapecchi, C.; Martini, J., ANALYSIS OF THE TRIBOLOGICAL BEHAVIOUR OF TITANIUM FASTENERS UNDER DIFFERENT TIGHTENING STRATEGIES, in: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, American Society of Mechanical Engineers (ASME), «PVP», 2024, 1, pp. 1 - 7 (atti di: ASME 2024 Pressure Vessels and Piping Conference, PVP 2024, usa, 2024) [Contributo in Atti di convegno]
Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara, Design of Special Equipment for the Mechanical Testing of Runway Light Fixtures, «MACHINES», 2024, 12, Article number: 41, pp. 1 - 14 [articolo]Open Access
Fini, S.; Croccolo, D.; De Agostinis, M.; Olmi, G.; Paiardini, L.; Scapecchi, C.; Mele, M., Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments, «PROGRESS IN ADDITIVE MANUFACTURING», 2024, In Press, pp. 1 - 19 [articolo]Open Access
Croccolo D.; Di Schino A.; Montanari R.; Olmi G.; Stornelli G.; Testani C.; Varone A., High cycle fatigue response of grain refined EUROFER97, «INTERNATIONAL JOURNAL OF FATIGUE», 2024, 187, Article number: 108442, pp. 1 - 13 [articolo]Open Access
Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Nassar S.; Olmi G.; Scapecchi C.; Khan M.Y.; Tariq M.H.B., Replacing non-renewable lubricants with vegetables oils in threaded joints, «JOURNAL OF ADVANCED JOINING PROCESSES», 2024, 10, Article number: S2666330924000505, pp. 1 - 14 [articolo]Open Access
