Foto del docente

Alessandro Morri

Associate Professor

Department of Industrial Engineering

Academic discipline: ING-IND/21 Metallurgy

Publications

Di Egidio, Gianluca; Tonelli, Lavinia; Zanni, Mattia; Carosi, Daniele; Morri, Alessandro; Ceschini, Lorella, Direct artificial aging of the PBF-LB AlSi10Mg alloy designed to enhance the trade-off between strength and residual stress relief, «JOURNAL OF ALLOYS AND METALLURGICAL SYSTEMS», 2024, 5, Article number: 100063 , pp. 1 - 11 [Scientific article]Open Access

Carosi, Daniele; Zama, Fabiana; Morri, Alessandro; Ceschini, Lorella, Linearising anhysteretic magnetisation curves: A novel algorithm for finding simulation parameters and magnetic moments, «MATHEMATICS AND COMPUTERS IN SIMULATION», 2024, 221, pp. 210 - 221 [Scientific article]Open Access

Morri Alessandro; Zanni Mattia; Ceschini Lorella; Fortunato Alessandro; Pellizzari Massimo, Aging Behaviour of a 12.2Cr-10Ni-1Mo-1Ti-0.6Al Precipitation-Hardening Stainless Steel Manufactured via Laser Powder Bed Fusion, «METALS», 2023, 13, Article number: 1552 , pp. 1 - 19 [Scientific article]Open Access

Di Egidio G.; Martini C.; Borjesson J.; Ghassemali E.; Ceschini L.; Morri A., Dry sliding behavior of AlSi10Mg alloy produced by Laser-based Powder Bed Fusion: influence of heat treatment and microstructure, «WEAR», 2023, 516-517, pp. 516 - 517 [Scientific article]

Zanni, M; Berto, F; Vullum, PE; Tonelli, L; Morri, A; Ceschini, L, Effect of heat treatment and defects on the tensile behavior of a hot work tool steel manufactured by laser powder bed fusion, «FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES», 2023, 46, pp. 2681 - 2696 [Scientific article]Open Access

Di Egidio, Gianluca; Morri, Alessandro; Ceschini, Lorella; Tonelli, Lavinia, High‐Temperature Behavior of the Heat‐Treated and Overaged AlSi10Mg Alloy Produced by Laser‐Based Powder Bed Fusion and Comparison with Conventional Al–Si–Mg‐Casting Alloys, «ADVANCED ENGINEERING MATERIALS», 2023, 25, Article number: 2201238 , pp. 1 - 13 [Scientific article]Open Access

Di Egidio G.; Tonelli L.; Morri A.; Boromei I.; Shashkov P.; Martini C., Influence of Anodizing by Electro-Chemical Oxidation on Fatigue and Wear Resistance of the EV31A-T6 Cast Magnesium Alloy, «COATINGS», 2023, 13, Article number: 62 , pp. 1 - 18 [Scientific article]Open Access

Di Egidio, Gianluca; Martini, Carla; Ceschini, Lorella; Morri, Alessandro, Influence of Electroless Nickel—DLC (Diamond-like Carbon) Multilayer Coating on the Mechanical Performance of the Heat-Treated AlSi10Mg Alloy Produced by Powder Bed Fusion-Laser Beam, «MATERIALS», 2023, 16, Article number: 3313 , pp. 1 - 20 [Scientific article]Open Access

Di Egidio, Gianluca; Martini, Carla; Börjesson, Johan; Ghassemali, Ehsan; Ceschini, Lorella; Morri, Alessandro, Influence of Microstructure on Fracture Mechanisms of the Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion, «MATERIALS», 2023, 16, Article number: 2006 , pp. 1 - 28 [Scientific article]Open Access

Di Egidio, G.; Ceschini, L.; Martini, C.; Morri, A., Influence of Ni-P + DLC multilayer coatings on the tensile properties of the AlSi10Mg alloy produced by Laser-based Powder Bed Fusion, «PROCEDIA STRUCTURAL INTEGRITY», 2023, 47, pp. 337 - 347 [Scientific article]Open Access

Tonelli L.; Liverani E.; Di Egidio G.; Fortunato A.; Morri A.; Ceschini L., On the Role of Microstructure and Defects in the Room and High-Temperature Tensile Behavior of the PBF-LB A357 (AlSi7Mg) Alloy in As-Built and Peak-Aged Conditions, «MATERIALS», 2023, 16, Article number: 2721 , pp. 1 - 20 [Scientific article]Open Access

Di Egidio, Gianluca; Ceschini, Lorella; Morri, Alessandro; Zanni, Mattia, Room- and High-Temperature Fatigue Strength of the T5 and Rapid T6 Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion, «METALS», 2023, 13, Article number: 263 , pp. 1 - 20 [Scientific article]Open Access

Zanni, Mattia; Morri, Alessandro; Messieri, Simone; Ceschini, Lorella, Tensile behaviour of a hot work tool steel manufactured via Laser Powder Bed Fusion: effect of an innovative high pressure heat treatment, «PROCEDIA STRUCTURAL INTEGRITY», 2023, 47, pp. 370 - 382 [Scientific article]Open Access

Di Egidio, Gianluca; Ceschini, Lorella; Morri, Alessandro; Martini, Carla; Merlin, Mattia, A Novel T6 Rapid Heat Treatment for AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion: Comparison with T5 and Conventional T6 Heat Treatments, «METALLURGICAL AND MATERIALS TRANSACTIONS. B, PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE», 2022, 53, pp. 284 - 303 [Scientific article]Open Access

Zanni M.; Morri A.; Ceschini L., Development and validation of a probabilistic model for notch fatigue strength prediction of tool steels based on surface defects, «FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES», 2022, 45, pp. 113 - 132 [Scientific article]Open Access