Foto del docente

Gianluca Di Egidio

Ricercatore a tempo determinato tipo a) (junior)

Dipartimento di Ingegneria Industriale

Settore scientifico disciplinare: ING-IND/21 METALLURGIA

Pubblicazioni

Di Egidio, Gianluca; Tonelli, Lavinia; Zanni, Mattia; Carosi, Daniele; Morri, Alessandro; Ceschini, Lorella, Direct artificial aging of the PBF-LB AlSi10Mg alloy designed to enhance the trade-off between strength and residual stress relief, «JOURNAL OF ALLOYS AND METALLURGICAL SYSTEMS», 2024, 5, Article number: 100063, pp. 1 - 11 [articolo]Open Access

Di Egidio G.; Martini C.; Borjesson J.; Ghassemali E.; Ceschini L.; Morri A., Dry sliding behavior of AlSi10Mg alloy produced by Laser-based Powder Bed Fusion: influence of heat treatment and microstructure, «WEAR», 2023, 516-517, pp. 516 - 517 [articolo]

Di Egidio, Gianluca; Morri, Alessandro; Ceschini, Lorella; Tonelli, Lavinia, High‐Temperature Behavior of the Heat‐Treated and Overaged AlSi10Mg Alloy Produced by Laser‐Based Powder Bed Fusion and Comparison with Conventional Al–Si–Mg‐Casting Alloys, «ADVANCED ENGINEERING MATERIALS», 2023, 25, Article number: 2201238, pp. 1 - 13 [articolo]Open Access

Di Egidio G.; Tonelli L.; Morri A.; Boromei I.; Shashkov P.; Martini C., Influence of Anodizing by Electro-Chemical Oxidation on Fatigue and Wear Resistance of the EV31A-T6 Cast Magnesium Alloy, «COATINGS», 2023, 13, Article number: 62, pp. 1 - 18 [articolo]Open Access

Di Egidio, Gianluca; Martini, Carla; Ceschini, Lorella; Morri, Alessandro, Influence of Electroless Nickel—DLC (Diamond-like Carbon) Multilayer Coating on the Mechanical Performance of the Heat-Treated AlSi10Mg Alloy Produced by Powder Bed Fusion-Laser Beam, «MATERIALS», 2023, 16, Article number: 3313, pp. 1 - 20 [articolo]Open Access

Di Egidio, Gianluca; Martini, Carla; Börjesson, Johan; Ghassemali, Ehsan; Ceschini, Lorella; Morri, Alessandro, Influence of Microstructure on Fracture Mechanisms of the Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion, «MATERIALS», 2023, 16, Article number: 2006, pp. 1 - 28 [articolo]Open Access

Di Egidio, G.; Ceschini, L.; Martini, C.; Morri, A., Influence of Ni-P + DLC multilayer coatings on the tensile properties of the AlSi10Mg alloy produced by Laser-based Powder Bed Fusion, «PROCEDIA STRUCTURAL INTEGRITY», 2023, 47, pp. 337 - 347 [articolo]Open Access

Laghi V.; Arrè L.; Tonelli L.; Di Egidio G.; Ceschini L.; Monzón I.; Laguía A.; Dieste J.A.; Palermo M., Mechanical and microstructural features of wire-and-arc additively manufactured carbon steel thick plates, «INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY», 2023, 127, pp. 1391 - 1405 [articolo]Open Access

Tonelli L.; Liverani E.; Di Egidio G.; Fortunato A.; Morri A.; Ceschini L., On the Role of Microstructure and Defects in the Room and High-Temperature Tensile Behavior of the PBF-LB A357 (AlSi7Mg) Alloy in As-Built and Peak-Aged Conditions, «MATERIALS», 2023, 16, Article number: 2721, pp. 1 - 20 [articolo]Open Access

Di Egidio, Gianluca; Ceschini, Lorella; Morri, Alessandro; Zanni, Mattia, Room- and High-Temperature Fatigue Strength of the T5 and Rapid T6 Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion, «METALS», 2023, 13, Article number: 263, pp. 1 - 20 [articolo]Open Access

Di Egidio, Gianluca; Ceschini, Lorella; Morri, Alessandro; Martini, Carla; Merlin, Mattia, A Novel T6 Rapid Heat Treatment for AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion: Comparison with T5 and Conventional T6 Heat Treatments, «METALLURGICAL AND MATERIALS TRANSACTIONS. B, PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE», 2022, 53, pp. 284 - 303 [articolo]Open Access

Gianluca Di Egidio, Evaluation by nanoindentation of the influence of heat treatments and the consequent induced microstructure on the mechanical response of the heattreated L-PBF AlSi10Mg alloy, «LA METALLURGIA ITALIANA», 2022, 6, pp. 8 - 16 [articolo]

Gianluca Di Egidio, Alessandro Morri, Lorella Ceschini,, EVALUATION OF HIGH-TEMPERATURE TENSILE PROPERTIES OF HEAT-TREATED ALSI10MG ALLOY PRODUCED BY LASER-BASED POWDER BED FUSION, in: Proceedings 31st International Conference on Metallurgy and Materials, 2022, pp. 580 - 586 (atti di: METAL 2022, BRNO, 18-19/5/2022) [Contributo in Atti di convegno]Open Access

Gianluca Di Egidio, Lorella Ceschini, Alessandro Morri, Effetto del trattamento termico T6 su microstruttura e comportamento meccanico della lega AlSi10Mg prodotta mediante Selective Laser Melting: stato dell’arte, in: 38MO CONVEGNO NAZIONALE AIM, 2021, pp. 1 - 8 (atti di: 38MO CONVEGNO NAZIONALE AIM, Napoli, 18-19-20-25-26/01/2020) [Contributo in Atti di convegno]