Foto del docente

Enrico Troiani

Associate Professor

Department of Industrial Engineering

Academic discipline: IIND-01/D Aerospace Structures and Design

Director of Second Cycle Degree in Aerospace Engineering

Publications

Troiani, E., Analytical evaluation of the Stress Intensity Factor in stiffened sheets with multiple side damage, «AIMS MATERIALS SCIENCE», 2016, 3, pp. 1615 - 1622 [Scientific article]Open Access

Troiani, Enrico; Falaschetti, Maria Pia; Taddia, Sara; Ceruti, Alessandro, CFRP Crash Absorbers in Small UAV: Design and Optimization, in: SAE Technical Papers, Warrendale, PA 15096, Society of Automotive Engineers, «SAE TECHNICAL PAPER», 2015, 2015-September, pp. 1 - 7 (atti di: SAE 2015 Aerotech Congress & Exhibition, Seattle, WA (usa), 22-24 Settembre 2015) [Contribution to conference proceedings]

Vjola Ristori; Maria Pia Falaschetti; Enrico Troiani; Marco Montemurro; André Baeten; Goran Ivetic; Gianluca Molinari, Damage Tolerance Assessment of Near Edge Impacts in CFRP Structures, in: Structural Integrity: Embracing the future – respecting the past; supporting aging fleets with new technologies, Espoo, VTT Technical Research Centre of Finland Ltd, 2015, pp. 542 - 549 (atti di: 34th Conference and 28th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity, Helsinki, Finlandia, 1-5 giugno 2015) [Contribution to conference proceedings]

Sara, Taddia; Enrico, Troiani, Effect of Laser Shock Peening on the Fatigue Behavior of Thin Aluminum Panels, «MATERIALS TODAY: PROCEEDINGS», 2015, 2, pp. 5006 - 5014 [Scientific article]

Troiani, Enrico; Taddia, Sara; Ivan, Meneghin; Gianluca, Molinari; Claudia, Polese, Effect of LSP Generated Residual Stresses on Fatigue Crack Propagation in Thin Panels, in: Structural Integrity: Embracing the future – respecting the past; supporting aging fleets with new technologies, ESPOO, VTT Technical Research Centre of Finland Ltd, 2015, pp. 466 - 476 (atti di: 34th Conference and 28th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity, Helsinki, Finlandia, 1-5 Giugno 2015) [Contribution to conference proceedings]

Troiani E; Taddia S, Evaluation of fatigue life in laser peened thin aluminum panels, «LIGHT METAL AGE», 2015, 73, pp. 16 - 21 [Scientific article]

Falaschetti, M.P; Scafè, M.; Troiani, E.; Agostinelli, V.; Sangiorgi, S., Experimental Determination of Compressive Residual Strength of a Carbon/epoxy Laminate after a Near-edge Impact, «PROCEDIA ENGINEERING», 2015, 109, pp. 171 - 180 [Scientific article]Open Access

Donati, Lorenzo; Troiani, Enrico; Proli, Paolo; Tomesani, Luca, FEM Analysis and experimental validation of Friction Welding process of 6xxx alloys for the prediction of welding quality, «MATERIALS TODAY: PROCEEDINGS», 2015, 2, pp. 5045 - 5054 [Scientific article]

S. Gubinelli; E. Paolini; A. Giorgetti; M. Mazzotti; A. Rizzo; E. Troiani; M. Chiani, An Ultra-Wideband Radar Approach to Nondestructive Testing, in: Proceedings of the 2014 IEEE International Conference on Ultra-Wideband, Piscataway, NJ,, IEEE, 2014, pp. 303 - 308 (atti di: 2014 IEEE International Conference on Ultra-Wideband, Paris, France, September 2014) [Contribution to conference proceedings]

M. Scafè; G. Raiteri; A. Brentari; R. Dlacic; E. Troiani; M.P. Falaschetti; E. Besseghini, Estimate of compressive strength of an unidirectional composite lamina using cross-ply and angle-ply laminates, «FRATTURA E INTEGRITÀ STRUTTURALE», 2014, 29, pp. 399 - 409 [Scientific article]Open Access

R. Di Sante; L. Donati; E. Troiani; P. Proli, Evaluation of bending strain measurements in a composite sailboat bowsprit with embedded Fiber Bragg Gratings, «MEASUREMENT», 2014, 54, pp. 106 - 117 [Scientific article]

TROIANI Enrico; TADDIA Sara; MENEGHIN Ivan; MOLINARI Gianluca, Fatigue Crack Growth in Laser Shock Peened Thin Metallic Panels, «ADVANCED MATERIALS RESEARCH», 2014, 996, pp. 775 - 781 [Scientific article]

E. Troiani; L. Donati; G. Molinari; R. Di Sante, Influence of Plying Strategies and Trigger Type on Crashworthiness Proprieties of Carbon Fiber Laminates Cured Through Autoclave Processing, «STROJNISKI VESTNIK», 2014, 60, pp. 375 - 381 [Scientific article]

D. Ghelli; V. Cantarini; E. Troiani, Influence of thermal cycles on the low velocity impact response of CFRP laminates, in: Proceedings of the 16th European Conference on Composite Materials, 2014, pp. 1 - 11 (atti di: 16th European conference on Composite Materials (ECCM-16, Seville - Spain, 22-26/06/2014) [Contribution to conference proceedings]

Ghelli, D.; Cantarini, V.; Troiani, E., Influence of thermal cycling on the low velocity impact response of CFRP laminates, in: 16th European Conference on Composite Materials, ECCM 2014, European Conference on Composite Materials, ECCM, 2014, pp. 1 - 11 (atti di: 16th European Conference on Composite Materials, ECCM 2014, esp, 2014) [Contribution to conference proceedings]

Latest news

At the moment no news are available.