M.P. Falaschetti; F. Rondina; N. Zavatta; E. Troiani; L. Donati, Effective implementation of numerical models for the crashworthiness of composite laminates, «ENGINEERING FAILURE ANALYSIS», 2024, 160, Article number: 108196, pp. 1 - 15 [articolo]Open Access
Sandor Endre Kovacs, Tamas Miko, Enrico Troiani, Dionysios Markatos, Daniel Petho, Greta Gergely, Laszlo Varga, Zoltan Gacsi, Additive Manufacturing of 17-4PH Alloy: Tailoring the Printing Orientation for Enhanced Aerospace Application Performance, «AEROSPACE», 2023, 10, Article number: 619, pp. 1 - 13 [articolo]Open Access
Zavatta N.; Troiani E., Preliminary tests on additive-manufactured Al-Sc specimens for the setup of a numerical model for Laser Shock Peening, «JOURNAL OF PHYSICS. CONFERENCE SERIES», 2023, 2526, Article number: 012044, pp. 1 - 9 [articolo]Open Access
Falcetelli, F; Cristiani, D; Yue, N; Sbarufatti, C; Troiani, E; Di Sante, R; Zarouchas, D, Qualification of distributed optical fiber sensors using probability of detection curves for delamination in composite laminates, «STRUCTURAL HEALTH MONITORING», 2023, 22, pp. 2972 - 2986 [articolo]Open Access
Nicola Zavatta, Maria Pia Falaschetti, Johan Birnie Hernández, Enrico Troiani, SIMULATION OF CRACK GROWTH IN ADHESIVELY BONDED JOINTS VIA COHESIVE ZONE MODELS, in: Proceedings of the 38th Conference and 31st Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity, Amsterdam, NLR – Netherlands Aerospace Centre, 2023, pp. 1 - 17 (atti di: 38th Conference and 31st Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity, Delft, 26-29 June 2023) [Contributo in Atti di convegno]Open Access
Bacciaglia A.; Falcetelli F.; Troiani E.; Di Sante R.; Liverani A.; Ceruti A., Geometry reconstruction for additive manufacturing: From G-CODE to 3D CAD model, in: Materials Today: Proceedings, 2022, 2023, pp. 16 - 22 (atti di: Innovative Manufacturing, Mechatronics & Material Forum 2022, iM3F 2022, Pekan, Malaysia, 20/07/2022) [Contributo in Atti di convegno]Open Access
Francesco Taddei, Michel Barbezat, Enrico Troiani, Giacomo Struzziero, INFLUENCE OF PRE-CURING STAGE IN ADDITIVE MANUFACTURING OF
ADVANCED THERMOSETTING COMPOSITES, in: Proceedings of the 20th European Conference on Composite Materials - Composites Meet Sustainability (Vol 2)), Lausanne, Ecole Polytechnique Fédérale de Lausanne (EPFL), 2022, 2, pp. 391 - 398 (atti di: 20th European Conference on Composite Materials, Lausanne, Svizzera, 26-30 June 2022) [Contributo in Atti di convegno]Open Access
Falaschetti M.P.; Zavatta N.; Rondina F.; Donati L.; Troiani E., Numerical Investigation of Al-Reinforced CFRP Composite under Low-Velocity Impact, in: Key Engineering Materials, 2022, 926 KEM, pp. 1959 - 1968 (atti di: 25th International Conference on Material Forming, ESAFORM 2022, Braga (Portugal), 27 April 2022 - 29 April 2022) [Contributo in Atti di convegno]Open Access
Francesco Falcetelli, Nicolas Venturini, Maria Barroso Romero, Marcias J Martinez, Shashank Pant, Enrico Troiani, Broadband signal reconstruction for SHM: An experimental and numerical time reversal methodology, «JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES», 2021, 32, pp. 1043 - 1058 [articolo]Open Access
Falaschetti, Maria Pia; Scafé, Matteo; Zavatta, Nicola; Troiani, Enrico, Hygrothermal Ageing Influence on BVI-Damaged Carbon/Epoxy Coupons under Compression Load, «POLYMERS», 2021, 13, pp. 2038 - 2050 [articolo]Open Access
Francesco Falcetelli, Raffaella Di Sante, Enrico Troiani, Strategies for Embedding Optical Fiber Sensors in Additive Manufacturing Structures, in: Piervincenzo Rizzo, Alberto Milazzo, European Workshop on Structural Health Monitoring, Springer, Cham, «LECTURE NOTES IN CIVIL ENGINEERING», 2021, pp. 362 - 371 (atti di: European Workshop on Structural Health Monitoring. EWSHM 2020, Palermo, 2020) [Contributo in Atti di convegno]
Zavatta, N.; Troiani, E., A numerical approach to the disbonding mechanism of adhesive joints, in: Lecture Notes in Mechanical Engineering, Springer, «LECTURE NOTES IN MECHANICAL ENGINEERING», 2020, pp. 360 - 371 (atti di: 30th Symposium of the International Committee on Aeronautical Fatigue, ICAF 2019, pol, 2019) [Contributo in Atti di convegno]
Falaschetti M.P.; Rondina F.; Donati L.; Troiani E., Influence of simulation parameters in the combined loading compression testing of CFRP specimens, in: Procedia Manufacturing, Elsevier B.V., 2020, 47, pp. 43 - 50 (atti di: 23rd International Conference on Material Forming, ESAFORM 2020, deu, 2020) [Contributo in Atti di convegno]Open Access
Falaschetti, Maria Pia; Rondina, Francesco; Zavatta, Nicola; Gragnani, Lisa; Gironi, Martina; Troiani, Enrico; Donati, Lorenzo, Material Characterization for Reliable Resin Transfer Molding Process Simulation, «APPLIED SCIENCES», 2020, 10, Article number: 1814, pp. 1 - 13 [articolo]Open Access
Kidane, Bereket Sitotaw; Troiani, Enrico, Static Aeroelastic Beam Model Development for Folding Winglet Design, «AEROSPACE», 2020, 7, pp. 106 - 121 [articolo]Open Access