Foto del docente

Ana Pavlovic

Ricercatrice a tempo determinato tipo a) (junior)

Dipartimento di Ingegneria Industriale

Settore scientifico disciplinare: ING-IND/14 PROGETTAZIONE MECCANICA E COSTRUZIONE DI MACCHINE

Pubblicazioni

Papavassiliou, Alessandro; Pavlovic, Ana; Minak, Giangiacomo, Crashworthiness investigation on a Carbon Fiber Reinforced Plastic solar vehicle, «COMPOSITE STRUCTURES», 2024, 340, Article number: 118147, pp. 1 - 14 [articolo]

Mauricio da Silva Moreira, Carlos Eduardo Marcos Guilherme, João Henrique Corrêa de Souza, Elizaldo Domingues dos Santos, Ana Pavlovic, Liércio André Isoldi, Influence of Curvature Radius on Mechanical Behavior of Extruded 6061-T6 Aluminum in Roll Bending, «JOURNAL OF APPLIED AND COMPUTATIONAL MECHANICS», 2024, xx, pp. 1 - 14 [articolo]

Pavlovic A.; Fragassa C., Investigating the crash-box-structure’s ability to absorb energy, «INTERNATIONAL JOURNAL OF CRASHWORTHINESS», 2024, 10, pp. 1 - 15 [articolo]

Fragassa C.; Pavlovic A., Enhanced Predictive Model for the Mechanical Response of Compression-Loaded Slender Structures, «METALS», 2023, 13, Article number: 1286, pp. 1 - 17 [articolo]Open Access

Pavlovic A.; Minak G., FEM-SPH Numerical Simulation of Impact Loading on Floating Laminates, «JOURNAL OF MARINE SCIENCE AND ENGINEERING», 2023, 11, Article number: 1590, pp. 1 - 17 [articolo]Open Access

Fragassa C.; Pavlovic A.; Berardi L.; Vitali G., Investigating the Dynamic Behaviour of a Linear Vibratory Feeder, «PROCEEDINGS ON ENGINEERING SCIENCES», 2023, 5, pp. 709 - 720 [articolo]Open Access

Momcilovic D.; Atanasovska I.; Vulovic S.; Pavlovic A., Life Assessment of Corroded Wire for Prestressing, «METALS», 2023, 13, Article number: 387, pp. 1 - 20 [articolo]Open Access

Vulovic S.; Zivkovic M.; Pavlovic A.; Vujanac R.; Topalovic M., Strength Analysis of Eight-Wheel Bogie of Bucket Wheel Excavator, «METALS», 2023, 13, Article number: 466, pp. 1 - 15 [articolo]Open Access

Santulli C.; Fragassa C.; Pavlovic A.; Nikolic D., Use of Sea Waste to Enhance Sustainability in Composite Materials: A Review, «JOURNAL OF MARINE SCIENCE AND ENGINEERING», 2023, 11, Article number: 855, pp. 1 - 11 [articolo]Open Access

Brevetto n. 102022000012050, DISPOSITIVO INTEGRATO PER IL DOSAGGIO, LA MISCELAZIONE E LA NEBULIZZAZIONE RAPIDA DI SOSTANZE CHIMICHE IN SOSPENSIONE A SCOPO DI DETERGENZA E SANIFICAZIONE PER SUPERFICI ED AMBIENTI.

Pavlovic, A, Finite Elements Analysis of the Hyperelastic Impeller Rotating in the Self-Priming Pump, «JOURNAL OF APPLIED AND COMPUTATIONAL MECHANICS», 2022, 8, pp. 1103 - 1112 [articolo]

Feijó B.C.; Pavlovic A.; Rocha L.A.O.; Isoldi L.A.; Lorente S.; dos Santos E.D., Geometrical investigation of microchannel with two trapezoidal blocks subjected to laminar convective flows with and without boiling, «REPORTS IN MECHANICAL ENGINEERING», 2022, 3, pp. 20 - 36 [articolo]Open Access

Milan Sljivic; Stefan Wagner; Ana Pavlovic; Dragan Marinkovic, Metal Additive Manufacturing of End-Use Components and Parts: A Practical Overview, in: 25, Heidelberg, Springer, 2022, pp. 149 - 160 [capitolo di libro]

Coordinamento del progetto: SANYTECH.

Živković, Jelena; Dunić, Vladimir; Milovanović, Vladimir; Pavlović, Ana; Živković, Miroslav, A Modified Phase-Field Damage Model for Metal Plasticity at Finite Strains: Numerical Development and Experimental Validation, «METALS», 2021, 11, Article number: 47, pp. 1 - 24 [articolo]Open Access

Ultimi avvisi

Al momento non sono presenti avvisi.