Cerca
Menu
Foto del docente

Michele Pinelli

Professore ordinario di altro ateneo

Alma Mater Studiorum - Università di Bologna

Pubblicazioni

vai alle Pubblicazioni

Pubblicazioni antecedenti il 2004

Articoli in Rivista Internazionale

  1. [Q1] Friso, R., Suman, A., Vulpio, A., Zanini, N., Casari, N., Pinelli, M., Towards an innovative mechanistic model to predict the detachment process of a deposited layer (2023) International Journal of Heat and Mass Transfer, 200, art. no. 123525.
  2. [Q1] Bahlawan H., Losi E., Manservigi L., Morini M., Pinelli M., Spina P.R., Venturini M., Optimization of a renewable energy plant with seasonal energy storage for the transition towards 100% renewable energy supply (2022) Renewable Energy, 198, pp. 1296 – 1306.
  3. [Q1] Vulpio, A., Suman, A., Casari, N., Pinelli, M., A Simplified Method for the Deposition Rate Assessment on the Vanes of a Multistage Axial-Flow Compressor (2022) Journal of Turbomachinery, 144 (7), art. no. 71009.
  4. [Q2] Suman, A., Vulpio, A., Casari, N., Pinelli, M., A Stochastic Model for Nanoparticle Deposits Growth (2022) Journal of Engineering for Gas Turbines and Power, 144 (1), art. no. 011022.
  5. [Q2] Aldi, N., Casari, N., Pinelli, M., Suman, A., Vulpio, A., Performance Degradation of a Shell-and-Tube Heat Exchanger due to Tar Deposition (2022) Energies, 15 (4), art. no. 1490.
  6. [Q3] Casari, N., Pinelli, M., Suman, A., Vulpio, A., Performance losses and washing recovery of a helicopter engine compressor operating in ground-idle conditions (2022) CEAS Aeronautical Journal, 13 (1), pp. 113-125.
  7. [Q1] Casari, N., Fortini, A., Pinelli, M., Suman, A., Vulpio, A., Zanini, N., Measurement approaches for the analysis of soil layer by microparticle adhesion (2022) Measurement: Journal of the International Measurement Confederation, 187, art. no. 110185.
  8. [Q1] Bahlawan, H., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Simultaneous optimization of the design and operation of multi-generation energy systems based on life cycle energy and economic assessment (2021) Energy Conversion and Management, 249, art. no. 114883.
  9. [Q1] Suman, A., Vulpio, A., Casari, N., Pinelli, M., Outstretching population growth theory towards surface contamination (2021) Powder Technology, 394, pp. 597-607.
  10. [Q1] Suman, A., Vulpio, A., Casari, N., Pinelli, M., di Lillo, F., D'Amico, L., Analysis of soil and soot deposits by X-ray computed microtomography (2021) Powder Technology, 394, pp. 608-621.
  11. [Q2] Suman, A., Vulpio, A., Casari, N., Pinelli, M., Kurz, R., Brun, K., Deposition Pattern Analysis on a Fouled Multistage Test Compressor (2021) Journal of Engineering for Gas Turbines and Power, 143 (8), art. no. 081006.
  12. [Q2] Vulpio, A., Suman, A., Casari, N., Pinelli, M., Kurz, R., Brun, K., Analysis of Timewise Compressor Fouling Phenomenon on a Multistage Test Compressor: Performance Losses and Particle Adhesion (2021) Journal of Engineering for Gas Turbines and Power, 143 (8), art. no. 081005.
  13. [Q2] Fortini, A., Suman, A., Vulpio, A., Merlin, M., Pinelli, M., Microstructural and erosive wear characteristics of a high chromium cast iron (2021) Coatings, 11 (5), art. no. 490.
  14. [Q1] Bahlawan, H., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Optimization of energy and economic scheduling of a hybrid energy plant by using a dynamic programming approach (2021) Applied Thermal Engineering, 187, art. no. 116577.
  15. [Q2] Casari, N., Pinelli, M., Spina, P.R., Suman, A., Vulpio, A., Performance degradation due to fouling and recovery after washing in a multistage test compressor (2021) Journal of Engineering for Gas Turbines and Power, 143 (3), art. no. 031020.
  16. [Q3] Vulpio, A., Suman, A., Casari, N., Pinelli, M., Dust ingestion in a rotorcraft engine compressor: experimental and numerical study of the fouling rate (2021) Aerospace, 8(3), 81.
  17. [Q2] Guerra, D., Polastri, M., Battarra, M., Suman, A., Mucchi, E., Pinelli, M., Design multistage external gear pumps for dry sump systems: methodology and application (2021) Mathematical Problems in Engineering, 2021, art. no. 8888128.
  18. [Q1] Suman, A., Vulpio, A., Fortini, A., Fabbri, E., Casari, N., Merlin, M., Pinelli, M., Experimental analysis of micro-sized particles time-wise adhesion: the influence of impact velocity and surface roughness (2021) International Journal of Heat and Mass Transfer, 165, art. no. 120632.
  19. [Q1] Bahlawan, H., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Optimization of energy and economic scheduling of a hybrid energy plant by using a dynamic programming approach (2021) Applied Thermal Engineering, 187, art. no. 116577.
  20. [Q1] Casari, N., Fadiga, E., Pinelli, M., Randi, S., Suman, A., Ziviani, D., Investigation of flow characteristics in a single screw expander: a numerical approach (2020) Energy, 213, art. no. 118730.
  21. [Q1] Cavazzini, G., Giacomel, F., Ardizzon, G., Casari, N., Fadiga, E., Pinelli, M., Suman, A., Montomoli, F., CFD-based optimization of scroll compressor design and uncertainty quantification of the performance under geometrical variations (2020) Energy, 209, art. no. 118382.
  22. [Q1] Casari, N., Pinelli, M., Suman, A., Candido, A., Morini, M., Deposition of syngas tar in fuel supplying duct of a biomass gasifier: a numerical study (2020) Fuel, 273, art. no. 117579.
  23. [Q1] Stuppioni, U., Suman, A., Pinelli, M., Blum, A., Computational fluid dynamics modeling of gaseous cavitation in lubricating vane pumps: an approach based on dimensional analysis (2020) Journal of Fluids Engineering, Transactions of the ASME, 142 (7), art. no. 071206-1.
  24. [Q1] Fadiga, E., Casari, N., Suman, A., Pinelli, M., CoolFOAM: The CoolProp wrapper for OpenFOAM (2020) Computer Physics Communications, 250, art. no. 107047.
  25. [Q1] Casari, N., Suman, A., Pinelli, M., Porosity-driven approaches to model fouling effects on flow field (2020) Journal of Turbomachinery, 142 (4), art. no. 041005.
  26. [Q2] Suman, A., Fabbri, E., Fortini, A., Merlin, M., Pinelli, M., On the design strategies for SMA-based morphing actuators: state of the art and common practices applied to a fascinating case study (2020) Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 234 (14), pp. 2114-2130.
  27. [Q2] Fadiga, E., Casari, N., Suman, A., Pinelli, M., Structured mesh generation and numerical analysis of a scroll expander in an open-source environment (2020) Energies, 13 (3), art. no. 666.
  28. [N/A] Casari, N., Pinelli, M., Suman, A., Vulpio, A., Appleby, C., Kyte, S., Assessment of the washing effectiveness of on-purpose designed eco-friendly cleaner against soot deposits (2020) Journal Global Power Propulsion Society, 4, pp. 253–263.
  29. [N/A] Casari, N., Fadiga, E., Pinelli, M., Suman, A., Ziviani, D., CFD simulations of single-and twin-screw machines with Openfoam (2020) Designs, 4 (1), art. no. 2, pp. 1-15.
  30. [Q1] Casari, N., Pinelli, M., Suman, A., Analysis of CoolProp library for the assessment of uncertainty propagation for refrigerant fluids in state diagrams and thermodynamic properties [Analyse de la bibliothèque CoolProp pour l’évaluation de la propagation de l'incertitude pour les fluides frigorigènes dans les diagrammes d’état et les propriétés thermodynamiques] (2019) International Journal of Refrigeration, 107, pp. 214-224.
  31. [Q1] Bahlawan, H., Morini, M., Pinelli, M., Poganietz, W.-R., Spina, P.R., Venturini, M., Optimization of a hybrid energy plant by integrating the cumulative energy demand (2019) Applied Energy, 253, art. no. 113484.
  32. [Q1] Bahlawan, H., Morini, M., Pinelli, M., Spina, P.R., Dynamic programming based methodology for the optimization of the sizing and operation of hybrid energy plants (2019) Applied Thermal Engineering, 160, art. no. 113967.
  33. [Q1] Suman, A., Casari, N., Fabbri, E., di Mare, L., Montomoli, F., Pinelli, M., Generalization of particle impact behavior in gas turbine via non-dimensional grouping (2019) Progress in Energy and Combustion Science, 74, pp. 103-151.
  34. [Q1] Munari, E., D'Elia, G., Morini, M., Pinelli, M., Spina, P.R., Stall and surge in wet compression: test rig development and experimental results (2019) Journal of Engineering for Gas Turbines and Power, 141 (7), art. no. 071008.
  35. [Q1] Munari, E., Morini, M., Pinelli, M., Brun, K., Simons, S., Kurz, R., Moore, J., An advanced surge dynamic model for simulating emergency shutdown events and comparing different antisurge strategies (2019) Journal of Engineering for Gas Turbines and Power, 141 (7), art. no. 071003.
  36. [Q1] Suman, A., Fabbri, E., Fortini, A., Pinelli, M., Optical measurements based on practical methods for detecting time-wise morphing structures (2019) Measurement: Journal of the International Measurement Confederation, 136, pp. 454-465.
  37. [Q1] Suman, A., Casari, N., Fabbri, E., Pinelli, M., Di Mare, L., Montomoli, F., Gas turbine fouling tests: review, critical analysis, and particle impact behavior map (2019) Journal of Engineering for Gas Turbines and Power, 141 (3), art. no. 032601.
  38. [Q1] Aldi, N., Casari, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Gas turbine fouling: a comparison among 100 heavy-duty frames (2019) Journal of Engineering for Gas Turbines and Power, 141 (3), art. no. 032401.
  39. [Q1] Munari, E., Morini, M., Pinelli, M., Brun, K., Simons, S., Kurz, R., A new index to evaluate the potential damage of a surge event: the surge severity coefficient (2019) Journal of Engineering for Gas Turbines and Power, 141 (3), art. no. 031017.
  40. [Q1] Bianchi, M., Branchini, L., Casari, N., De Pascale, A., Melino, F., Ottaviano, S., Pinelli, M., Spina, P.R., Suman, A., Experimental analysis of a micro-ORC driven by piston expander for low-grade heat recovery (2019) Applied Thermal Engineering, pp. 1278-1291.
  41. [Q2] Casari, N., Fadiga, E., Pinelli, M., Randi, S., Suman, A., Pressure pulsation and cavitation phenomena in a micro-ORC system (2019) Energies, 12 (11), art. no. 2186.
  42. [Q1] Fortini, A., Rizzoni, R., Suman, A., Fabbri, E., Merlin, M., Pinelli, M., An experimentally-driven approach to model bending in a thermally activated SMA-based beam (2018) Smart Materials and Structures, 27 (12), art. no. 125004.
  43. [Q1] Munari, E., D'Elia, G., Morini, M., Mucchi, E., Pinelli, M., Spina, P.R., Experimental investigation of vibrational and acoustic phenomena for detecting the stall and surge of a multistage compressor (2018) Journal of Engineering for Gas Turbines and Power, 140 (9), art. no. 092605.
  44. [Q1] Aldi, N., Casari, N., Dainese, D., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Quantitative computational fluid dynamics analyses of particle deposition in a heavy-duty subsonic axial compressor (2018) Journal of Engineering for Gas Turbines and Power, 140 (8), art. no. 082601.
  45. [Q1] Bahlawan, H., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Development of reliable NARX models of gas turbine cold, warm, and hot start-up (2018) Journal of Engineering for Gas Turbines and Power, 140 (7), art. no. 071202.
  46. [Q1] Casari, N., Pinelli, M., Suman, A., di Mare, L., Montomoli, F., EBFOG: deposition, erosion, and detachment on high-pressure turbine vanes (2018) Journal of Turbomachinery, 140 (6), art. no. 061001.
  47. [Q1] Munari, E., Morini, M., Pinelli, M., Brun, K., Simons, S., Kurz, R., Measurement and prediction of centrifugal compressor axial forces during surge - Part II: dynamic surge model (2018) Journal of Engineering for Gas Turbines and Power, 140 (1), art. no. 012602.
  48. [Q1] Brun, K., Simons, S., Kurz, R., Munari, E., Morini, M., Pinelli, M. Measurement and prediction of centrifugal compressor axial forces during surge - Part I: surge force measurements (2018) Journal of Engineering for Gas Turbines and Power, 140 (1), art. no. 012601.
  49. [Q1] Aldi, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., An innovative method for the evaluation of particle deposition accounting for rotor/stator interaction (2017) Journal of Engineering for Gas Turbines and Power, 139 (5), art. no. 4034968.
  50. [Q1] Suman, A., Morini, M., Aldi, N., Casari, N., Pinelli, M., Spina, P.R., A compressor fouling review based on an historical survey of ASME Turbo Expo papers (2017) Journal of Turbomachinery, 139 (4), art. no. 041005.
  51. [Q1] Casari, N., Pinelli, M., Suman, A., di Mare, L., Montomoli, F., An energy-based fouling model for gas turbines: EBFOG (2017) Journal of Turbomachinery, 139 (2), art. no. 021002.
  52. [Q1] Munari, E., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Experimental investigation of stall and surge in a multistage compressor (2017) Journal of Engineering for Gas Turbines and Power, 139 (2), art. no. 022605.
  53. [Q1] Pinelli, M., Suman, A., Thermal and fluid dynamic analysis of an air-forced convection rotary bread-baking oven by means of an experimental and numerical approach (2017) Applied Thermal Engineering, 117, pp. 330-342.
  54. [Q1] Suman, A., Morini, M., Kurz, R., Aldi, N., Brun, K., Pinelli, M., Spina, P.R., Estimation of the particle deposition on a subsonic axial compressor blade (2017) Journal of Engineering for Gas Turbines and Power, 139 (1), art. no. 012604.
  55. [Q2] Suman, A., Fortini, A., Aldi, N., Pinelli, M., Merlin, M., Analysis of the aerodynamic and structural performance of a cooling fan with morphing blade (2017) International Journal of Turbomachinery and Propulsion Power 2(2).
  56. [Q2] Aldi, N., Davoli, G., Pinelli, M., Rossi, L., Suman, A., Eco-design of a small size industrial fan for ceramic tile cooling (2016) Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 230 (5), pp. 502-511.
  57. [Q2] Suman, A., Fortini, A., Aldi, N., Merlin, M., Pinelli, M., A shape memory alloy-based morphing axial fan blade – Part II: blade shape and computational fluid dynamics analyses (2016) Journal of Engineering for Gas Turbines and Power, 138 (6), art. no. 062604.
  58. [Q2] Fortini, A., Suman, A., Aldi, N., Merlin, M., Pinelli, M., A shape memory alloy-based morphing axial fan blade – Part I: blade structure design and functional characterization (2016) Journal of Engineering for Gas Turbines and Power, 138 (2), art. no. 022601.
  59. [Q1] Asgari, H., Chen, X., Morini, M., Pinelli, M., Sainudiin, R., Spina, P.R., Venturini, M., NARX models for simulation of the start-up operation of a single-shaft gas turbine (2016) Applied Thermal Engineering, 93, pp. 368-376.
  60. [Q2] Suman, A., Kurz, R., Aldi, N., Morini, M., Brun, K., Pinelli, M., Spina, P.R., Quantitative computational fluid dynamics analyses of particle deposition on a subsonic axial compressor blade (2016) Journal of Engineering for Gas Turbines and Power, 138 (1), art. no. 012603.
  61. [Q2] Suman, A., Morini, M., Kurz, R., Aldi, N., Brun, K., Pinelli, M., Spina, P.R., Estimation of the particle deposition on a transonic axial compressor blade (2016) Journal of Engineering for Gas Turbines and Power, 138 (1), art. no. 012604.
  62. [Q1] Morini, M., Pinelli, M., Spina, P.R., Vaccari, A., Venturini, M., Feasibility analysis of gas turbine inlet air cooling by means of liquid nitrogen evaporation for IGCC power augmentation (2015) Applied Thermal Engineering, 80, pp. 168-177.
  63. [Q1] Suman, A., Morini, M., Kurz, R., Aldi, N., Brun, K., Pinelli, M., Spina, P.R., Quantitative computational fluid dynamic analyses of particle deposition on a transonic axial compressor blade - Part II: impact kinematics and particle sticking analysis (2015) Journal of Turbomachinery, 137 (2), art. no. 021010.
  64. [Q1] Morini, M., Pavan, C., Pinelli, M., Romito, E., Suman, A., Analysis of a scroll machine for micro ORC applications by means of a RE/CFD methodology (2015) Applied Thermal Engineering, 80, pp. 132-140.
  65. [Q2] Suman, A., Fortini, A., Aldi, N., Pinelli, M., Merlin, M., Using shape memory alloys for improving automotive fan blade performance: Experimental and computational fluid dynamics analysis (2015) Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229 (5), pp. 477-486.
  66. [Q1] Gonzalez-Salazar, M.A., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Finkenrath, M., Poganietz, W.-R., Methodology for estimating biomass energy potential and its application to Colombia (2014) Applied Energy, 136, pp. 781-796.
  67. [Q1] Barbieri, E.S., Dai, Y.J., Morini, M., Pinelli, M., Spina, P.R., Sun, P., Wang, R.Z., Optimal sizing of a multi-source energy plant for power heat and cooling generation (2014) Applied Thermal Engineering, 71 (2), pp. 736-750.
  68. [Q1] Pinelli, M., Suman, A., A numerical method for the efficient design of free opening hoods in industrial and domestic applications (2014) Energy, 74 (C), pp. 484-493.
  69. [Q1] Fabbri, D., Long, Q., Das, S., Pinelli, M., Computational modelling of emboli travel trajectories in cerebral arteries: influence of microembolic particle size and density (2014) Biomechanics and Modeling in Mechanobiology, 13 (2), pp. 289-302.
  70. [Q1] Ferrari, C., Melino, F., Pinelli, M., Spina, P.R., Thermophotovoltaic energy conversion: analytical aspects, prototypes and experiences (2014) Applied Energy, 113, pp. 1717-1730.
  71. [Q1] Suman, A., Kurz, R., Aldi, N., Morini, M., Brun, K., Pinelli, M., Spina, P.R., Quantitative computational fluid dynamics analyses of particle deposition on a transonic axial compressor blade - Part I: particle zones impact (2014) Journal of Turbomachinery, 137 (2), art. no. 021009.
  72. [Q1] Gonzalez-Salazar, M.A., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Finkenrath, M., Poganietz, W.-R., Methodology for biomass energy potential estimation: projections of future potential in Colombia (2014) Renewable Energy, 69, pp. 488-505.
  73. [Q1] Aldi, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Venturini, M., Performance evaluation of nonuniformly fouled axial compressor stages by means of computational fluid dynamics analyses (2013) Journal of Turbomachinery, 136 (2), art. no. 021016.
  74. [Q1] Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Optimal allocation of thermal, electric and cooling loads among generation technologies in household applications (2013) Applied Energy, 112, pp. 205-214.
  75. [Q1] Azzone, E., Morini, M., Pinelli, M., Development of an equilibrium model for the simulation of thermochemical gasification and application to agricultural residues (2012) Renewable Energy, 46, pp. 248-254.
  76. [Q1] Barbieri, E., De Pascale, A., Ferrari, C., Melino, F., Morini, M., Peretto, A., Pinelli, M., Performance evaluation of the integration between a Thermo-Photo-Voltaic generator and an Organic Rankine Cycle (2012) Journal of Engineering for Gas Turbines and Power, 134 (10), art. no. 102301.
  77. [Q1] Cadorin, M., Pinelli, M., Vaccari, A., Calabria, R., Chiariello, F., Massoli, P., Bianchi, E., Analysis of a micro gas turbine fed by natural gas and synthesis gas: MGT test bench and combustor CFD analysis (2012) Journal of Engineering for Gas Turbines and Power, 134 (7), art. no. 71401.
  78. [Q1] Melino, F., Morini, M., Peretto, A., Pinelli, M., Spina, P.R., Compressor fouling modeling: relationship between computational roughness and gas turbine operation time (2012) Journal of Engineering for Gas Turbines and Power, 134 (5), art. no. 052401.
  79. [Q1] De Pascale, A., Ferrari, C., Melino, F., Morini, M., Pinelli, M., Integration between a ThermoPhotoVoltaic generator and an Organic Rankine Cycle (2012) Applied Energy, 97, pp. 695-703.
  80. [Q2] Pinelli, M., Spina, P.R., Venturini, M., Gas turbine health state determination: methodology approach and field application (2012) International Journal of Rotating Machinery, 2012, art. no. 142173.
  81. [Q1] Bettocchi, R., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Torsello, G., Setup of an experimental facility for the investigation of wet compression on a multistage compressor (2011) Journal of Engineering for Gas Turbines and Power, 133 (10), art. no. 102001.
  82. [Q1] Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Numerical analysis of the effects of nonuniform surface roughness on compressor stage performance (2011) Journal of Engineering for Gas Turbines and Power, 133 (7), art. no. 072402.
  83. [Q1] Cadorin, M., Morini, M., Pinelli, M., Numerical analyses of high Reynolds number flow of high pressure fuel gas through rough pipes (2010) International Journal of Hydrogen Energy, 35 (14), pp. 7568-7579.

    Erratum: Numerical analyses of high Reynolds number flow of high pressure fuel gas through rough pipes (International Journal of Hydrogen Energy (2010) 35 (7568-7579)) (2011) International Journal of Hydrogen Energy, 36 (23), p. 15455.

  84. [Q1] Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Computational fluid dynamics simulation of fouling on axial compressor stages (2010) Journal of Engineering for Gas Turbines and Power, 132 (7), art. no. 072401.
  85. [Q1] Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Influence of blade deterioration on compressor and turbine performance (2010) Journal of Engineering for Gas Turbines and Power, 132 (3), art. no. 032401.

    Erratum: Influence of blade deterioration on compressor and turbine performance (Journal of Engineering for Gas Turbines and Power (2010) 132: 3 (032401)) (2010) Journal of Engineering for Gas Turbines and Power, 132 (11), art. no. 117001.

  86. [Q1] Bettocchi, R., Cadorin, M., Cenci, G., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Energy and economic analyses of integrated biogas-fed energy systems (2009) Journal of Engineering for Gas Turbines and Power, 131 (6), art. no. 061401.
  87. [Q1] Pinelli, M., Bucci, G., Numerical based design of exhaust gas system in a cogeneration power plant (2009) Applied Energy, 86 (6), pp. 857-866.
  88. [Q1] Morini, M., Pinelli, M., Venturini, M., Analysis of biogas compression system dynamics (2009) Applied Energy, 86 (11), pp. 2466-2475.
  89. [Q1] Morini, M., Pinelli, M., Venturini, M., Development of a one-dimensional modular dynamic model for the simulation of surge in compression systems (2007) Journal of Turbomachinery, 129 (3), pp. 437-447.
  90. [Q1] Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Artificial intelligence for the diagnostics of gas turbines - Part II: Neuro-Fuzzy approach (2007) Journal of Engineering for Gas Turbines and Power, 129 (3), pp. 720-729.
  91. [Q1] Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Artificial intelligence for the diagnostics of gas turbines - Part I: Neural Network approach (2007) Journal of Engineering for Gas Turbines and Power, 129 (3), pp. 711-719.
  92. [Q1] Bettocchi, R., Pinelli, M., Spina, P.R., A multistage compressor test facility: Uncertainty analysis and preliminary test results (2005) Journal of Engineering for Gas Turbines and Power, 127 (1), pp. 170-177.
  93. [Q1] Pinelli, M., Piva, S., Solid/liquid phase change in presence of natural convection: a thermal energy storage case study (2003) Journal of Energy Resources Technology, Transactions of the ASME, 125 (3), pp. 190-198.
  94. [Q1] Pinelli, M., Spina, P.R., Gas turbine field performance determination: sources of uncertainties, (2002) Journal of Engineering for Gas Turbines and Power, 124 (1), pp. 155-160.
  95. [Q2] Pinelli, M., Casano, G., Piva, S., Solid-liquid phase-change heat transfer in a vertical cylinder heated from above (2000) Heat and Technology, 18 (1), pp. 61-67.

    Articoli in atti di convegno internazionale con referee (in volume)

  96. Friso, R., Suman, A., Zanini, N., Pinelli, M., A digital twin based prediction strategy for the compressor fouling effects during an airline mission (2022) Proceedings of Global Power and Propulsion Society, GPPS Chania22, GPPS-TC-2022-0085.
  97. Friso, R., Zanini, N., Suman, A., Casari, N., Pinelli, M., A Microscale-Based Methodology to Predict the Performance Degradation in Turbomachinery due to Particle Deposition, ASME Paper GT2022-XXXX.
  98. Suman, A., Vulpio, A., Pinelli, M., D’Amico, L., Microtomography of Soil and Soot Deposits: Analysis Of Three-Dimensional Structures and Surface Morphology (2022) ASME Paper GT2022-83070.
  99. Aldi, N., Casari, N., M., Oliani, S., Pinelli, M., Mollica, E., Menichini, F., Numerical Investigation of an Automotive Axial Fan: A Comparison Among Different CFD Software Packages and Experimental Validation (2022) ASME Paper GT2022-78066.
  100. Casari, N., M., Oliani, S., Pinelli, M., Suman, A., Particle Deposition on HPT Nozzle: Full 3D Investigation and Secondary Flows Effect, ASME Paper GT2022-XXXX.
  101. Suman, A., Zanini, N., Pinelli, M., Compressor Fouling Detection by Image Analysis (2022) Proc. XXVI Biennial Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines, Pisa, September 2022.
  102. Aldi, N., Casari, N., M., Pinelli, M., Suman, A., Vulpio, A., Saccenti, P., Evaluation of the wear-resistant plate performance on different locations over the flow path of a large-sized heavy-duty centrifugal fan (2022) Proceedings of the international conference on fan noise, fan technology and numerical methods, FAN 2022.
  103. Aldi, N., Casari, N., M., Oliani, S., Pinelli, M., Mollica, E., Menichini, F., Numerical investigation of an axial fan for automotive applications (2022) Proceedings of the international conference on fan noise, fan technology and numerical methods, FAN 2022.
  104. Casari, N., Crepaldi, M., Fadiga, E., Mitri, L., Pinelli, M., Suman, A., Stuppioni, U., Gambetti, D., Blum, A., Monterosso, F., Niedenthal, R., A novel method for the numerical investigation of pendulum slider pumps (2022) 13th International Fluid Power Conference, 13. IFK, March 21-23, 2022, Aachen, Germany.
  105. Vulpio, A., Suman, A., Casari, N., Pinelli, M., A quantitative approach for the estimation of the fouling rate on the stationary parts of a multistage test compressor (2021) ASME Paper GT2021-59449.
  106. Casari, N., Pinelli, M., Suman, A., Manganelli, M., Morini, M., Brun, K., Larosiliere, L., Jariwala, V., Dynamic model of multistage centrifugal compressor with a stage-by-stage anti-surge recirculating system (2021) ASME Paper GT2020-15554.
  107. Casari, N., Fadiga, E., Pinelli, M., Suman, A., Kurz, R., Davis, C.D., Marin, F., Assessment of non-standard procedure in field testing of gas turbine driven centrifugal compressors (2021) ASME Paper GT2020-15938.

  108. Suman, A., Vulpio, A., Casari, N., Pinelli, M., A stochastic model for nanoparticle deposits growth (2021) ASME Paper GT2021-59458.

  109. Friso, R., Oliani, S., Casari, N., Pinelli, M., Suman, A., Montomoli, F., Towards a machine learning based design for fouling of an axial turbine vane (2021) ASME Paper GT2020-59520.
  110. Aldi, N., Casari, N., Pinelli, M., Suman, A., Vulpio, A. Saccenti, P., Performance modification of an erosion-damaged large-sized centrifugal fan (2021) ASME Paper GT2020-59832.

  111. Oliani, S, Friso, R., Casari, N., Pinelli, M., Suman, A., Carnevale, M., Progresses in particle-laden flows simulations in multistage turbomachinery with openfoam (2021) ASME Paper GT2020-59520.
  112. Vulpio, A., Suman, A., Casari, N., Pinelli, M., Appleby, C., Kyte, S., Washing effectiveness assessment of different cleaners on a small-scale multistage compressor (2021) ASME Paper GT2021-59455.
  113. Oliani, S, Friso, R., Casari, N., Pinelli, M., Suman, A., Carnevale, M., A Comparative analysis of particle – mixing plane interaction in multistage turbomachinery simulations (2021) 14th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2021, Paper ID: ETC2021-544.
  114. Casari, N., Pinelli, M., Spina, P.R., Suman, A., Vulpio, A., Performance degradation due to fouling and recovery after washing in a multistage test compressor (2020) ASME Paper GT2020-15488.
  115. Oliani, S., Casari, N., Pinelli, M., Suman, A., Carnevale, M., Effect of jets in crossflow in deposition mitigation on full 3D NGV with endwall features (2020) ASME Paper GT2020-15367.
  116. Friso, R., Casari, N., Pinelli, M., Suman, A., Montomoli, F., Uncertainty analysis of inflow conditions on an HPT gas turbine nozzle: effect on particle deposition (2020) ASME Paper GT2020-15370.
  117. Suman, A., Vulpio, A., Casari, N., Pinelli, M., Kurz, R., Brun, K., Deposition pattern analysis on a fouled multistage test compressor (2020) ASME Paper GT2020-15476.
  118. Vulpio, A., Suman, A., Casari, N., Pinelli, M., Kurz, R., Brun, K., Analysis of time-wise compressor fouling phenomenon on a multistage test compressor: performance losses and particle adhesion (2020) ASME Paper GT2020-15418.
  119. Pepper, N., Montomoli, F., Giacomel, F., Cavazzini, G., Pinelli, M., Casari, N., Sharma, S., Uncertainty quantification and missing data for turbomachinery with probabilistic equivalence and arbitrary polynomial chaos, applied to scroll compressors (2020) ASME Paper GT2020-16139.
  120. Casari, N., Altmeppen, J., Koch, C., Pinelli, M., Staudacher, S., Suman, A., Vulpio, A., Numerical analysis of particle deposition in an aircraft engine compressor cascade (2020) ASME Paper GT2020-14506.
  121. Fadiga, E., Casari, N., Suman, A., Pinelli, M., Ziviani, D., Multi-component numerical investigation of a micro Organic Rankine Cycle (2020) Refrigeration Science and Technology, pp. 297-304.
  122. Guerra, D., Polastri, M., Battarra, M., Suman, A., Mucchi, E., Pinelli, M., A design procedure for multistage external gear pumps (2020) BATH/ASME 2020 Symposium on Fluid Power and Motion Control, FPMC 2020, art. no. V001T01A048.
  123. Casari, N., Pinelli, M., Suman, A., Vulpio, A., Appleby, C., Kyte, S., Assessment of the washing effectiveness of on-purpose designed eco-friendly cleaner against soot deposits (2020) GPPS Chania20 Technical Conference, Paper n. GPPS-tc-91.
  124. Fadiga, E., Casari, N., Suman, A., Pinelli, M., Fluid thermophysical properties modelling in an opensource platform: CoolFOAM (2020) ECOS 2020 – Proc. 33rd Int. Conf. on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, pp. 123-132
  125. Casari, N., Suman, A., Pinelli, M., Porosity driven approaches to model fouling effects on flow field (2019) ASME Paper GT2019-91631.
  126. Friso, R., Casari, N., Suman, A., Pinelli, M., Montomoli, F., A design for fouling oriented optimization of an HPT nozzle (2019) ASME Paper GT2019-91627.
  127. Suman, A., Casari, N., Fabbri, E., Pinelli, M., di Mare, L., Montomoli, F., A non-dimensional approach for generalizing the particle impact behavior of gas turbine fouling (2019) ASME Paper GT2019-91733.
  128. Aldi, N., Casari, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Vulpio, A., Gas turbine fouling: the influence of climate and part-load operating conditions (2019) ASME Paper GT2019-91748.
  129. Aldi, N., Casari, N., Pinelli, M., Suman, A., Vulpio, A., Saccenti, P., Beretta, R., Fortini, A., Merlin, M., Erosion behavior on a large-sized centrifugal fan (2019) 13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2019.
  130. Occari, M., Pinelli, M., Munari, E., Mollica, F., Mazzanti, V., Suman, A., Experimental tests with centrifugal pumps: degradation of performance, instability and dynamic phenomena with non-Newtonian suspensions of kaolin in water (2019) ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019.
  131. Occari, M., Mazzanti, V., Mollica, F., Munari, E., Pinelli, M., Suman, A., Numerical simulations of a centrifugal pump with a non-Newtonian fluid: influence on performances of different rheological modelling (2019) ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019.
  132. Randi, S., Casari, N., Fadiga, E., Suman, A., Pinelli, M., Ziviani, D., Groll, E., Shaffer, B., Verification of a 3D-CFD model of an Oldham ring scroll expander (2019) 5th International Seminar on ORC Power Systems, Paper ID: 188.
  133. Bianchi, M., Branchini, L., Casari, N., De Pascale, A., Fadiga, E., Melino, F., Ottaviano, S., Peretto, A., Pinelli, M., Spina, P.R., Suman A., Uncertainty quantification of performance parameters in a small scale orc test rig (2019) 5thInternational Seminar on ORC Power Systems, Paper ID: 146,
  134. Munari, E., Pinelli, M., A review of wet gas flow rate measurements by means of single phase meters (2018) ASME Paper GT2018-76190.
  135. Casari, N., Pinelli, M., Suman, A., On deposition and build-up detachment in compressor fouling (2018) ASME Paper GT2018-76776.
  136. Casari, N., Pinelli, M., Suman, A., An innovative approach towards fouling modeling: microscale deposition pattern and its effect on the flow field (2018) ASME Paper GT2018-76882.
  137. Casari, N., Pinelli, M., Suman, A., Di Mare, L., Montomoli, F., On deposit sintering and detachment from gas turbines (2018) ASME Paper GT2018-76774.
  138. Munari, E., D'Elia, G., Morini, M., Pinelli, M., Spina, P.R., Stall and surge in wet compression: test rig development and experimental results (2018) ASME Paper GT2018-76188.
  139. Suman, A., Casari, N., Fabbri, E., Pinelli, M., Di Mare, L., Montomoli, F., Gas turbine fouling tests: review, critical analysis and particle impact behavior map (2018) ASME Paper GT2018-76934.
  140. Aldi, N., Casari, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Gas turbine fouling: a comparison among one hundred heavy-duty frames (2018) ASME Paper GT2018-76947.
  141. Munari, E., Morini, M., Pinelli, M., Brun, K., Simons, S., Kurz, R., A new index to evaluate the potential damage of a surge event: the surge severity coefficient (2018) ASME Paper GT2018-76185.
  142. Aldi, N., Casari, N., Dainese, 9999D., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Fouling on a multistage axial compressor in the presence of a third substance at the particle/surface interface (2018) ASME Paper GT2018-76923.
  143. Munari, E., Morini, M., Pinelli, M., Brun, K., Simons, S., Kurz, R., Moore, J., An advanced surge dynamic model for simulating ESD events and comparing different anti-surge strategies (2018) ASME Paper GT2018-76179.
  144. Aldi, N., Casari, N., Pinelli, M., Suman, S., A statistical survey on the actual state-of-the-art performance of radial-flow fans based on market data (2018) Proceedings of the international conference on fan noise, fan technology and numerical methods, FAN2018.
  145. Bahlawan, H., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Development of reliable NARX models of gas turbine cold, warm and hot start-up (2017) ASME Paper GT2017-63332.
  146. Munari, E., D'Elia, G., Morini, M., Mucchi, E., Pinelli, M., Spina, P.R., Experimental investigation of vibrational and acoustic phenomena for detecting the stall and surge of a multistage compressor (2017) ASME Paper GT2017-64894.
  147. Brun, K., Simons, S., Kurz, R., Pinelli, M., Morini, M., Munari, E., Measurement and prediction of centrifugal compressor axial forces during surge - Part 1: surge force measurements (2017) ASME Paper GT2017-63061.
  148. Munari, E., Morini, M., Pinelli, M., Brun, K., Kurz, R., Measurement and prediction of centrifugal compressor axial forces during surge - Part 2: dynamic surge model (2017) ASME Paper GT2017-63070.
  149. Aldi, N., Casari, N., Dainese, D., Morini, M., Pinelli, M., Spina, P.R., Suman, A., The effects of third substances at the particle/surface interface in compressor fouling (2017) ASME Paper GT2017-64425.
  150. Aldi, N., Casari, N., Dainese, D., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Quantitative CFD analyses of particle deposition in a heavy-duty subsonic axial compressor (2017) ASME Paper GT2017-63563.
  151. Casari, N., Pinelli, M., Suman, A., Montomoli, F., Di Mare, L., EBFOG: Deposition, erosion and detachment on high pressure turbine vanes (2017) ASME Paper GT2017-64526.
  152. Casari, N., Suman, A., Ziviani, D., Morini, M., Pinelli, M., Virtual model for ORC – whole ORC modeling: WOM (2017) 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2017.
  153. Casari, N., Pinelli, M., Suman, A., Di Mare, L., Montomoli, F., Gas turbine blade geometry variation due to fouling (2017) 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017.
  154. Suman, A., Fortini, A., Aldi, N., Pinelli, M., Merlin, M., Analysis of the aerodynamic and structural performance of a cooling fan with morphing blade (2017) 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017.
  155. Buratto, C., Occari, M., Aldi, N., Casari, N., Pinelli, M., Spina, P.R., Suman, A., Centrifugal pumps performance estimation with Non-Newtonian fluids: review and critical analysis (2017) 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017.
  156. Casari, N., Pinelli, M., Suman, A., Di Mare, L., Montomoli, F., An energy based fouling model for gas turbines: EBFOG (2016) ASME Paper GT2016-58044.
  157. Munari, E., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Experimental investigation of stall and surge in a multistage compressor (2016) ASME Paper GT2016-57168.
  158. Suman, A., Fortini, A., Aldi, N., Merlin, M., Pinelli, M., A shape memory alloy-based morphing axial fan blade: functional characterization and fluid dynamic performance (2016) ASME Paper GT2016-57337.
  159. Aldi, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., An innovative method for the evaluation of particle deposition accounting for the rotor/stator interaction (2016) ASME Paper GT2016-57803.
  160. Suman, A., Morini, M., Kurz, R., Aldi, N., Brun, K., Pinelli, M., Spina, P.R., Estimation of the particle deposition on a subsonic axial compressor blade (2016) ASME Paper GT2016-57340.
  161. Bahlawan, H., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Set-up of a robust NARX model simulator of gas turbine start-up (2016) ECOS 2016 - Proceedings of the 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems.
  162. Munari, E., Morini, M., Pinelli, M., and Spina, P. R., Experimental investigation and modeling of surge in a multistage compressor (2016) Eighth International Conference on Applied Energy (ICAE), Beijing, China.
  163. Suman, A., Fortini, A., Aldi, N., Merlin, M., Pinelli, M., A shape memory alloy-based morphing axial fan blade, part II: blade shape and CFD analyses (2015) ASME Paper GT2015-42695.
  164. Fortini, A., Suman, A., Aldi, N., Merlin, M., Pinelli, M., A shape memory alloy-based morphing axial fan blade, part I: blade structure design and functional characterization (2015) ASME Paper GT2015-42695.
  165. Suman, A., Kurz, R., Aldi, N., Morini, M., Brun, K., Pinelli, M., Spina, P.R., Quantitative CFD analyses of particle deposition on a subsonic axial compressor blade (2015) ASME Paper GT2015-42689.
  166. Suman, A., Morini, M., Kurz, R., Aldi, N., Brun, K., Pinelli, M., Spina, P.R., Estimation of the particle deposition on a transonic axial compressor blade (2015) ASME Paper GT2015-42689.
  167. Buratto, C., Pinelli, M., Spina, P.R., Vaccari, A., Verga, C., CFD study on special duty centrifugal pumps operating with viscous and Non-Newtonian fluids (2015) 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015.
  168. Suman, A., Fortini, A., Aldi, N., Pinelli, M., Merlin, M., Using Shape Memory Alloys for improving automotive fan blade performances: experimental and CFD analysis (2015) 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015.
  169. Aldi, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Comparative analyses of micro-particle impact between transonic and subsonic axial compressors (2015) 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015.
  170. Aldi, N., Davoli, G., Pinelli, M., Rossi, L., Suman, A., Eco-design of a small size industrial fan for ceramic tile cooling (2015) Proceedings of the international conference on fan noise, fan technology and numerical methods, FAN 2015.
  171. Aldi, N., Buratto, C., Carandina, A., Pinelli, M., Suman, A., Zanardi, A., CFD optimization of a fan for industrial applications (2015) Proceedings of the international conference on fan noise, fan technology and numerical methods, FAN 2015
  172. Suman, A., Buratto, C., Aldi, N., Pinelli, M., Spina, P.R., Morini, M., A comparison between two different CFD approaches of a real scroll expander for micro-ORC applications (2015) Proceedings of the 3rd International Seminar on ORC Power Systems, ASME-ORC2015.
  173. Aldi, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Cross-validation of multistage compressor map generation by means of computational fluid dynamics and stage-stacking techniques (2014) ASME Paper GT2014-25278.
  174. Buratto, C., Carandina, A., Morini, M., Pavan, C., Pinelli, M., Spina, P.R., Design and characterization of an inlet duct for mass flow measurement in a micro gas turbine test rig (2014) ASME Paper GT2014-25391.
  175. Asgari, H., Chen, X.Q., Sainudiin, R., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Modeling and simulation of the start-up operation of a heavy-duty gas turbine by using NARX models (2014) ASME Paper GT2014-25056.
  176. Suman, A., Morini, M., Kurz, R., Aldi, N., Brun, K., Pinelli, M., Spina, P.R., Quantitative CFD analyses of particle deposition on a transonic axial compressor blade, Part II: impact kinematics and particle sticking analysis (2014) ASME Paper GT2014-25473.
  177. Suman, A., Kurz, R., Aldi, N., Morini, M., Brun, K., Pinelli, M., Spina, P.R., Quantitative CFD analyses of particle deposition on a transonic axial compressor blade, part I: particle zones impact (2014) ASME Paper GT2014-25282.
  178. Vaccari, A., Pinelli, M., Pirani, L., Gandolfi, N., CFD analysis of a Fluidized Bed Reactor for industrial application (2014) ASME International Mechanical Engineering Congress and Exposition, Paper ID: IMECE2014-37042.
  179. Morini, M., Pinelli, M., Spina, P.R., Vaccari, A., An innovative inlet air cooling system for IGCC power augmentation - Part III: Computational fluid dynamic analysis of syngas combustion in nitrogen-enriched air (2013) ASME Paper GT2013-94094.
  180. Aldi, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Venturini, M., Performance evaluation of non-uniformly fouled axial compressor stages by means of computational fluid dynamic analyses (2013) ASME Paper GT2013-95580.
  181. Gonzalez-Salazar, M., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Finkenrath, M., Poganietz, W.R., Methodology for biomass energy potential estimation: assessment of current potential in Colombia (2013) Proceedings of the Fifth International Conference on Applied Energy, ICAE 2013, Paper ID: ICAE2013-76.
  182. Gonzalez-Salazar, M., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Finkenrath, M., Poganietz, W.R., Methodology for biomass energy potential estimation: projections of future potential in Colombia (2013) Proceedings of the Fifth International Conference on Applied Energy, ICAE 2013, Paper ID: ICAE2013-77.
  183. Ferrari, C., Melino, F., Peretto, A., Pinelli, M., Emitter size optimization of a Thermo-Photo-Voltaic generator (2013) Proceedings of the Fifth International Conference on Applied Energy, ICAE 2013, Paper ID: ICAE2013-329.
  184. Morini, M. Pinelli, P.R. Spina, A. Vaccari, M. Venturini, Analysis of an innovative inlet air cooling system based on liquid nitrogen evaporation for IGCC power augmentation (2013) Proceedings of the Fifth International Conference on Applied Energy, ICAE 2013, Paper ID: ICAE2013-36.
  185. Morini, M., Pavan, C., Pinelli, M., Romito, E., Suman, A., Modelling of scroll machines: geometric, thermodynamics and CFD methods (2013) Proceedings of 2nd International Seminar on ORC Power Systems.
  186. Morini, M., Pavan, C., Pinelli, M., Romito, E., Suman, A., Geometric, thermodynamic and CFD analyses of a real scroll expander for micro ORC applications (2013) Proceedings of 2nd International Seminar on ORC Power Systems.
  187. Verga, C., Pinelli, M., Monesi, A., Slug catcher two-phase flow modeling and numerical simulations (2013) Proceedings of the Annual Offshore Technology Conference, 1, pp. 459-470.
  188. Verga, C., Pinelli, M., Dell'Oglio, S., Monesi, A., FPSO Computational Fluid Dynamics (CFD) analysis in heavy sea storm conditions for the validation of process design (2013) Proceedings of the Annual Offshore Technology Conference, 1, pp. 447-458.
  189. Barbieri, E.S., Dai, Y.J., Morini, M., Pinelli, M., Spina, P.R., Sun, P., Wang, R.Z., Optimal sizing of a multi-source energy plant for power heat and cooling generation (2013) Proceedings of the 3rd International Conference on Microgeneration and Related Technologies, April 15-17, 2013, Naples, Italy.
  190. Morini, M., Pinelli, M., Spina, P.R., An innovative inlet air cooling system for IGCC power augmentation - Part II: thermodynamic analysis (2012) ASME Paper GT2012-68352.
  191. Pinelli, M., Suman, A., Vanti, M., Numerical simulation of evacuated tube solar water heaters (2012) ASME Paper GT2012-69831.
  192. Ferrari, C., Morini, M., Pinelli, M., Spina, P.R., Analysis of some sources of numerical uncertainty applied to a transonic compressor stage (2012) ASME Paper GT2012-69826.
  193. Cavarzere, A., Morini, M., Pinelli, M., Spina, P.R., Vaccari, A., Venturini, M., Fuelling micro gas turbines with vegetable oils: Part I: straight and blended vegetable oil properties (2012) ASME Paper GT2012-68238.
  194. Cavarzere, A., Morini, M., Pinelli, M., Spina, P.R., Vaccari, A., Venturini, M., Fuelling micro gas turbines with vegetable oils: Part II: experimental analysis (2012) ASME Paper GT2012-68239.
  195. Ferrari, C., Melino, F., Barbieri, E., Morini, M., Pinelli, M., De Pascale, A., Peretto, A., Performance evaluation of the integration between a Thermo-Photo-Voltaic generator and an Organic Rankine Cycle (2012) ASME Paper GT2012-68894.
  196. Pinelli, M., Ferrari, C., Suman, A., Morini, M., Rossini, M., Fluid dynamic design and optimization of a double entry fan driven by tractor power take off for mist sprayer applications (2012) Proceedings of the international conference on fan noise, fan technology and numerical methods, FAN 2012
  197. Bosi, M., Ferrari, C., Melino, F., Pinelli, M., Spina, P.R., Thermophotovoltaic energy conversion – Part 1: analytical aspects, (2012) International Conference on Applied Energy, ICAE 2012, Paper ID: ICAE2012- A10175
  198. Barbieri, E.S., Ferrari, C., Melino, F., Pinelli, M., Spina, P.R., Venturini, M., Thermophotovoltaic energy conversion – Part 2: prototypes and experience (2012) International Conference on Applied Energy, ICAE 2012, Paper ID: ICAE2012- A10176
  199. Bosi, M., Ferrari, C., Melino, F., Pinelli, M., Spina, P.R., Venturini, M., Thermophotovoltaic generation: a state of the art review (2012) Proceedings of the 25th International Conference on Efficiency, Cost, Optimization and Simulation of Energy Conversion Systems and Processes, ECOS 2012, 1, pp. 258-278.
  200. Fabbri, D., Long, Q., Das, S., Pinelli, M., Study of embolic particle migration in cerebral arteries by computational modelling (2012) ASME 2012 Summer Bioengineering Conference, SBC 2012, pp. 1309-1310.
  201. Barbieri, E.S., Morini, M., Pinelli, M., Development of a model for the simulation of Organic Rankine Cycles based on group contribution techniques (2011) ASME Paper GT2011-45616.
  202. Bettocchi, R., Morini, M., Pinelli, M., Evaluation of the performance of a Sirocco fan driven by a diesel engine in mist sprayer applications (2011) ASME Paper GT2011-45539.
  203. Melino, F., Morini, M., Peretto, A., Pinelli, M., Spina, P.R., Compressor fouling modeling: relationship between computational roughness and gas turbine operation time (2011) ASME Paper GT2011- 46394.
  204. Ferrari, C., Pinelli, M., Spina, P.R., Bolognin, P., Borghi, L., Fluid dynamic design and optimization of two stage centrifugal fan for industrial burners (2011) ASME Paper GT2011-46087.
  205. Cadorin, M., Pinelli, M., Podeschi, E., Pompoli, F., Zanardi, A., Experimental characterization of the influence of auxiliary devices on the noise generated by industrial centrifugal fan and correlation to the geometrical and fluid dynamic parameters (2011) ASME Paper GT2011- 46088.
  206. Cadorin, M., Pinelli, M., Vaccari, A., Calabria, R., Chiariello, F., Massoli, P., Bianchi, E., Analysis of a micro gas turbine fed by natural gas and synthesis gas: test bench and combustor CFD analysis (2011) ASME Paper GT2011- 46090.
  207. Pinelli, M., Morini, M., Spina, P.R., Venturini, M., Ferrari, C., Analysis of the effects of simulated fouling on an axial compressor stage through CFD modeling (2011) 9th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2011 - Conference Proceedings, 1, pp. 261-270.
  208. De Pascale, A., Ferrari, C., Melino, F., Morini, M., Pinelli, M., Integration between a Thermo-Photo-Voltaic furnace and an Organic Rankine Cycle (2011) Third International Conference on Applied Energy, pp.2571-2586.
  209. Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Numerical analysis of the effects of non-uniform surface roughness on compressor stage performance (2010) ASME Paper GT2010-23291.
  210. Bettocchi, R., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Torsello, G., Set up of an experimental facility for the investigation of wet compression on a multistage compressor (2010) ASME Paper GT2010-22451.
  211. Cadorin, M., Pinelli, M., Spina, P.R., Morini, M., Thermoeconomic analysis of MicroCHP thermophotovoltaic (TPV) systems (2010) Proceedings of the 23rd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems, ECOS 2010, 2, pp. 153-160.
  212. Bettocchi, R., Caprara, C., Martelli, R., Minarelli, F., Morini, M., Pinelli, M., Venturini, M., Assessment of energy chains for distributed generation: agricultural and thermoeconomic analyses within Emilia-Romagna region (2010) Proceedings of the 23rd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems, ECOS 2010, 3, pp. 355-362.
  213. Cadorin, M., Morini, M., Pinelli, M., Numerical analyses of high Reynolds number flow of high pressure fuel gas through rough pipes (2009) ASME Paper GT2009-59243.
  214. Morini, M., Pinelli, M., Spina, P.R., Venturini, M., CFD simulation of fouling on axial compressor stages (2009) ASME Paper GT2009-59025.
  215. Bettocchi, R., Cadorin, M., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Assessment of the performance and of the profitability of CHP energy systems fed by vegetable oils (2009) ASME Paper GT2009-59022.
  216. Fantozzi, F., Laranci, P., Bianchi, M., De Pascale, A., Pinelli, M., Cadorin, M., CFD simulation of a microturbine annular combustion chamber fueled with methane and biomass pyrolysis syngas - Preliminary results (2009) ASME Paper GT2009-60030.
  217. Pocaterra, M., Gao, H., Das, S., Pinelli, M., Long, Q., Circumferential residual stress distribution and its influence in a diseased carotid artery (2009) Proceedings of the ASME Summer Bioengineering Conference 2009, SBC2009, (PART B), pp. 849-850.
  218. Luppi, M., Gao, H., Choudhury, A., Hopkins, W., Das, S., Pinelli, M., Long, Q., Assessment of structure distortion of paraffin wax histology section of human carotid atherosclerotic plaque specimen (2009) Proceedings of the ASME Summer Bioengineering Conference 2009, SBC2009, (PART B), pp. 847-848.
  219. Choudhury, A., Luppi, M., Hopkins, W., Gao, H., Das, S., Kill, I., Pinelli, M., Long, Q., High resolution 3d reconstruction of an atherosclorotic plaque by a combination of histology and 3d ultrasound (2009) Proceedings of the ASME Summer Bioengineering Conference 2009, SBC2009, (PART A), pp. 189-190.
  220. Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Influence of blade deterioration on compressor and turbine performance (2008) ASME Paper GT2008-50043.
  221. Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Cadorin, M., Cenci, G., Morini, M., Energetic and economic analyses of integrated biogas-fed energy systems (2008) ASME Paper GT2008-50044.
  222. Morini, M., Cataldi, G., Pinelli, M., Venturini, M., A model for the simulation of large-size single-shaft gas turbine start-up based on operating data fitting (2007) ASME Paper GT2007-27373.
  223. Cenci, G., Pinelli, M., An integrated experimental-numerical case study for a university course about fluid dynamic design of turbomachinery (2007) ASME Paper GT2007-27805.
  224. Morini, M., Pinelli, M., Venturini, M., Acoustic and vibrational analyses on a multi-stage compressor for unstable behavior precursor identification (2007) ASME Paper GT2007-27040.
  225. Morini, M., Pinelli, M., Venturini, M., Application of a one-dimensional modular dynamic model for compressor surge avoidance (2007) ASME Paper GT2007-27041.
  226. Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Cenci, G., Morini, M., Energy production from biomass: development of a general model and application to anaerobic digestion (2007) ASME Paper GT2007-27039.
  227. Fabbri, G., Quan, L., Hao, G., Koenig, C.S., Collins, M.W., Pinelli, M., Stress analysis of carotid arterial stenosis with 3-D fluid-structure interaction simulations (2007) Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007, pp. 513-514.
  228. Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Zanetta, G.A., Assessment of the robustness of gas turbine diagnostics tools based on neural networks (2006) ASME Paper GT2006-90118.
  229. Cenci, G., Pinelli, M., Numerical analysis of a laboratory centrifugal pump for the training of graduate engineers (2006) ASME Paper GT2006-90696.
  230. Morini, M., Pinelli, M., Venturini, M., Development of a one-dimensional modular dynamic model for the simulation of surge in compression systems (2006) ASME Paper GT2005-68031.
  231. Pinelli M., Numerical characterization through a CFD approach of a pressure-relief valve for automotive applications (2006) Proceedings 13th Conference on Modelling Fluid Flow (CMFF’06), pp-396-404.
  232. Pinelli, M., Mazzi, A., Russo, G., Arrangement and optimization of turbocompressors in an off-shore natural gas extraction station (2005) ASME Paper GT2005-68031.
  233. Bettocchi, R., Spina, P.R., Pinelli, M., Venturini, M., Artificial intelligence for the diagnostics of gas turbines. Part II: neuro-fuzzy approach (2005) ASME Paper GT2005-68027.
  234. Bettocchi, R., Spina, P.R., Pinelli, M., Venturini, M., Artificial intelligence for the diagnostics of gas turbines. Part I: neural network approach (2005) ASME Paper GT2005-68026.
  235. Pinelli, M., Numerical analysis for the optimal fluid dynamic design of a two blade self-priming solid-handling centrifugal pump (2005) 6th Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC, Paper n. 052_02/166, pp. 552-561.
  236. Pinelli, M., Bucci, G., Numerical investigation of different stack design solutions in a cogeneration power plant (2004) ASME Paper GT2004-53426.
  237. Bettocchi, R., Spina, P.R., Pinelli, M., Venturini, M., Burgio, M., Set up of a robust neural network for gas turbine simulation (2004) ASME Paper GT2004-53421.
  238. Bettocchi, R., Pinelli, M., Spina, P.R., A multi-stage compressor test facility: uncertainty analysis and preliminary test results (2003) ASME Paper GT2003-38397.
  239. Pinelli, M., Spina, P.R., Venturini, M., Optimized operating point selection for gas turbine health state analysis by using a multi-point technique (2003) ASME Paper GT2003-38191.
  240. Pinelli, M., Venturini, M., Burgio, M., Statistical methodologies for reliability assessment of gas turbine measurements (2003) ASME Paper GT2003-38407.
  241. Pinelli, M., A 1D/3D integrated CFD numerical approach for self-priming solid-handling centrifugal pump analysis (2003) Proceedings 5th European Conference on Turbomachinery, ETC 2003, pp. 587-596.
  242. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Sebastianelli, S., Bezzi, F., A software tool for gas turbine on-condition monitoring and diagnostics (2003) Offshore Mediterranean Conference and Exhibition 2003, OMC 2003.
  243. Carraretto, C., Pinelli, M., Stoppato A., Venturini, M., Gas Path Analysis and exegetic diagnostics for gas turbine health state determination (2003) Proceedings 16th International Conference on Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2003, pp. 299-307.
  244. Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Statistical analyses to improve gas turbine diagnostics reliability (2003) Proceedings International Gas Turbine Congress 2003, IGTC’03, p. 1-8.
  245. Pinelli, M., Venturini, M., Application of methodologies to evaluate the health state of gas turbines in a cogenerative combined cycle power plant (2002) ASME Paper GT-2002-30248.
  246. Bettocchi, R., Pinelli, M., Spina, P.R., A program for the evaluation of pollutant emissions in combined cycle power plants with supplementary firing (2002) ASME Paper GT-2002-30483.
  247. Pinelli, M., Spina, P.R., Venturini, M., A multiple operating point minimization technique for gas turbine operating state determination (2002) ASME IMECE2002/AES-33188, ASME International Mechanical Engineering Congress and Exposition, Proceedings, pp. 233-241.
  248. Pinelli, M., Piva, S., Energy storage with solid/liquid phase change in presence of natural convection (2001) American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, 41, pp. 355-363.
  249. Pinelli, M., Venturini, M., Improvement of the accuracy in gas turbine health determination (2001) ASME Paper 2001-GT-0476.
  250. Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Sebastianelli, S., A system for health state determination of natural gas compression gas turbines (2001) ASME Paper 2001-GT-0223.
  251. Pinelli, M., Venturini, M., Operating state historical data analysis to support gas turbine malfunction detection (2001) American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, 41, pp. 457-462.
  252. Pinelli, M., Spina, P.R., Gas turbine field performance determination: Sources of uncertainties (2000) ASME Paper 2000-GT-0311.
  253. Pinelli, M., Spina, P.R., Influence of different sets of measurements on gas turbine field performance determination (2000) American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, 40, pp. 569-576.

    Articoli in atti di convegno con referee (in rivista)

  254. Suman A., Zanini N., Friso R., Pinelli M., Bottos L., Assessment of the volume and material container influence on juice cooling process (2022) IOP Conference Series: Earth and Environmental Science, Volume 1106, Issue 1, Article number 012011.
  255. Casari, N., Pinelli, M., Spina, P.R., Suman, A., Vulpio, A., Experimental assessment of fouling effects in a multistage axial compressor (2020) E3S Web of Conferences, 197, art. no. 11007.
  256. Casari, N., Fadiga, E., Pinelli, M., Suman, A., Kovacevic, A., Rane, S., Ziviani, D., Numerical investigation of oil injection in a Roots blower operated as expander (2019) IOP Conference Series: Materials Science and Engineering, 604 (1), art. no. 012075.
  257. Vulpio, A., Casari, N., Morini, M., Pinelli, M., Suman, A., Numerical investigation of a wood-chip downdraft gasifier (2019) E3S Web of Conferences, 113, art. no. 01002.
  258. Bahlawan, H., Morini, M., Pinelli, M., Poganietz, W.-R., Spina, P.R., Venturini, M., Optimal design of a hybrid energy plant by accounting for the cumulative energy demand (2019) Energy Procedia, 158, pp. 2834-2840.
  259. Randi, S., Suman, A., Casari, N., Pinelli, M., Ziviani, D., Numerical analysis of oil injection effects in a single screw expander (2018) IOP Conference Series: Materials Science and Engineering, 425 (1), art. no. 012001.
  260. Casari, N., Pinelli, M., Suman, A., Kovacevic, A., Rane, S., Ziviani, D., Full 3D numerical analysis of a twin screw compressor by employing open-source software (2018) IOP Conference Series: Materials Science and Engineering, 425 (1), art. no. 012017.
  261. Casari, N., Pinelli, M., Suman, A., Pavanelli, G., Reducing pressure valve with real gases: An integrated approach for the design (2018) Energy Procedia, 148, pp. 607-614.
  262. Bianchi, M., Branchini, L., De Pascale, A., Orlandini, V., Ottaviano, S., Peretto, A., Melino, F., Pinelli, M., Spina, P.R., Suman, A., Experimental investigation with steady-state detection in a micro-ORC test bench (2017) Energy Procedia, 126, pp. 469-476.
  263. Aldi, N., Buratto, C., Casari, N., Dainese, D., Mazzanti, V., Mollica, F., Munari, E., Occari, M., Pinelli, M., Randi, S., Spina, P. R., Suman, A., Experimental and numerical analysis of a Non-Newtonian fluids processing pump (2017) Energy Procedia, 126, pp. 762-769.
  264. Casari, N., Suman, A., Morini, M., Pinelli, M., Real gas expansion with dynamic mesh in common positive displacement machines (2017) Energy Procedia, 129, pp. 248-255.
  265. Munari, E., Morini, M., Pinelli, M., Spina, P.R., Experimental investigation and modeling of surge in a multistage compressor (2017) Energy Procedia, 105, pp. 1751-1756.
  266. Suman, A., Randi, S., Casari, N., Pinelli, M., Nespoli, L.,Experimental and numerical characterization of an oil-free scroll expander (2017) Energy Procedia, 129, pp. 403-410.
  267. Casari, N., Suman, A., Ziviani, D., Van Den Broek, M., De Paepe, M., Pinelli, M., Computational models for the analysis of positive displacement machines: real gas and dynamic mesh (2017) Energy Procedia, 129, pp. 411-418.
  268. Bianchi, M., Branchini, L., De Pascale, A., Orlandini, V., Ottaviano, S., Pinelli, M., Spina, P.R., Suman, A., Experimental performance of a micro-ORC energy system for low grade heat recovery (2017) Energy Procedia, 129, pp. 899-906.
  269. Aldi, N., Buratto, C., Pinelli, M., Spina, P.R., Suman, A., Casari, N., CFD analysis of a Non-Newtonian fluids processing pump (2016) Energy Procedia, 101, pp. 742-749.
  270. Suman, A., Ziviani, D., Gabrielloni, J., Pinelli, M., De Paepe, M., Van Den Broek, M., Different numerical approaches for the analysis of a single screw expander, (2016) Energy Procedia, 101, pp. 750-757.
  271. Ancona, M.A., Bianchi, M., Branchini, L., De Pascale, A., Melino, F., Orlandini, V., Ottaviano, S., Peretto, A., Pinelli, M., Spina, P.R., Suman, A., A micro-ORC energy system: preliminary performance and test bench development (2016) Energy Procedia, 101, pp. 814-821.
  272. Barbieri, E.S., Morini, M., Munari, E., Pinelli, M., Spina, P.R., Vecci, R., Concurrent optimization of size and switch-on priority of a multisource energy system for a commercial building application (2015) Energy Procedia, 81, pp. 45-54.
  273. Aldi, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., An interdisciplinary approach to study the fouling phenomenon (2015) Energy Procedia, 82, pp. 280-285.
  274. Ferrari, C., Melino, F., Pinelli, M., Spina, P.R., Venturini, M., Overview and status of thermophotovoltaic systems (2014) Energy Procedia, 45, pp. 160-169.
  275. Cavarzere, A., Morini, M., Pinelli, M., Spina, P.R., Vaccari, A., Venturini, M., Experimental analysis of a micro gas turbine fuelled with vegetable oils from energy crops (2014) Energy Procedia, 45, pp. 91-100.
  276. Aldi, N., Morini, M., Pinelli, M., Spina, P.R., Suman, A., Venturini, M., Numerical analysis of the effects of surface roughness localization on the performance of an axial compressor stage (2014) Energy Procedia, 45, pp. 1057-1066.
  277. Ziviani, D., Suman, A., Lecompte, S., De Paepe, M., Van Den Broek, M., Spina, P.R., Pinelli, M., Venturini, M., Beyene, A., Comparison of a single-screw and a scroll expander under part-load conditions for low-grade heat recovery ORC systems (2014) Energy Procedia, 61, pp. 117-120.

    Articoli in libri (capitoli, articoli)

  278. Mucchi, E., Battarra, M., Suman, A., Pinelli, M., Dalpiaz, G., Combining lumped parameter modelling and CFD analysis for the pressure ripple estimation of tandem gear pumps (2019) Positive Displacement Machines: Modern Design Innovations and Tools, pp. 369-397.
  279. Bonanno, A., Raimondo, M., Pinelli, M., Use of nanostructured coating to improve heat exchanger efficiency (2019) Factories of the Future: The Italian Flagship Initiative, pp. 275-292.
  280. Bianchi M., Bosi M., Ferrari C., Melino F., Pinelli M., Thermo-Photo-Voltaic generator development (2015) Energy Science and Technology - Volume 6: Solar Engineering-II (Photovoltaics and Solar Cells) – Published by: Studium Press LLC, USA, ISBN: 1-626990-67-0.
  281. Carandina, A., Morini, M., Pavan, C., Pinelli, M., A distributed control system for a field of spin-elevation heliostats (2014) Lecture Notes in Mechanical Engineering, 5, pp. 517-531.
  282. Dalpiaz, G., Morini, M., Pinelli, M., Il Laboratorio MechLav del Tecnopolo di Ferrara: un primo bilancio ad un anno dalla nascita (2011) Annuario Socio-Economica Ferrarese, CDS Edizioni, pp. 308-314.
  283. Bettocchi R., Morini M., Pinelli M., Stefanelli C., Tortonesi M., CenTec: un laboratorio di ricerca industriale e trasferimento tecnologico al servizio del territorio (2010) Annuario Socio-Economico Ferrarese, CDS Edizioni, pp. 175-179.
  284. Bettocchi, R., Cadorin, M., Morini, M., Pinelli, M., L'opportunità delle agroenergie. La filiera biomassa-energia nel contesto emiliano-romagnolo e ferrarese (2009) Annuario Socio-Economico Ferrarese, CDS Edizioni, pp. 395-400.
  285. Morini, M., Pinelli, M., Energia tra individuo e ambiente: percezione e comunicazione dei sistemi di conversione dell'energia (2007) Annuario Socio-Economico Ferrarese, CDS Edizioni, pp. 439-451.

    Articoli in atti di convegno internazionale senza referee

  286. Casari, N., Pinelli, M., Suman, A., Kovacevic, A., Rane, S. R., Ziviani, D., Full 3D numerical analysis of a roots blower with open-source software (2018) 24th International Compressor Engineering Conference at Purdue, Paper ID 2620.
  287. Randi, S., Casari, N., Pinelli, M., Suman, A., Ziviani, D., WOM: whole ORC Model (2018) 17th International Refrigeration and Air Conditioning Conference at Purdue, Paper ID 2004.
  288. Suman, A., Ziviani, D., Gabrielloni, J., Pinelli, M., De Paepe, M., Van Den Broek, M., CFD approaches applied to a single-screw expander (2016) 23rd International Compressor Engineering Conference at Purdue, Paper ID 1488.
  289. Buratto, C., Casari, N., Aldi, N., Pinelli, M., Suman, A., CFD analysis of Non-Newtonian fluid processing pump (2016) 11th OpenFOAM® Workshop, June 25-30, Guimarães, Portugal.
  290. Casari, N., Buratto, C., Aldi, N., Pinelli, M., Suman, A., Implementation and evaluation of Ahlert-Mclaury erosion model on a cyclone particle separator (2016) 11th OpenFOAM® Workshop, June 25-30, Guimarães, Portugal.
  291. Suman, A., Coltro, M., Pinelli, M., CFD Analysis of a rotary bread backing oven (2015) International CAE Conference, 29-20 Ottobre, Pacengo del Garda, Verona, Italy.
  292. Carandina, A., Morini, M., Pavan, C., Pinelli, M., A distributed control system for a field of spin-elevation heliostats (2013) Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, May 08-10, 2013, Ferrara.
  293. Cadorin, M., Vaccari, A., Pinelli, M., Numerical analysis of a micro gas turbine can-combustor fed by synthesis gas: numerical evaluation of the combustor geometry influence (2012) CAE International Conference, Lazise (VR).
  294. Melino, F., Ferrari, C. Bianchi, M., De Pascale, A., Peretto, A., Morini, M., Pinelli, M., Spina, P.R., Energy system based on integration between a Thermo-Photo-Voltaic generator and an Organic Rankine Cycle (2011) Ecomondo 2011, Maggioli Editore, pp: 443-449, Anno: 2011.
  295. Bettocchi, R., Cadorin, M., Morini, M., Pinelli, M., Spina, P. R., Venturini, M., Biogas utilization for electricity production in small scale energy systems (2009) Proc. 17th EUBIA - European Biomass Conference and Exhibition, Hamburg, Germany, Paper OA2.3.
  296. Venturini, M., Bettocchi, R., Pinelli, M., Spina, P. R., A comprehensive approach for measurement validation and health state determination of gas turbines: methodology and field application (2008) 5th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, July 15-18, Edinburgh, Scotland, UK.
  297. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Statistical analyses to support gas turbine monitoring and diagnostics (2003) International Gas Turbine Congress 2003 (IGTC ’03) IGTC2003-TS-004.
  298. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Sebastianelli, S., Bezzi, F., A software tool for gas turbine on-condition monitoring and diagnostics (2003) The Mediterranean: new oil and gas routes for an ancient sea, OMC 2003, Ravenna.
  299. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Sebastianelli, S., Analisi dei dati storici di funzionamento di una turbina a gas per la diagnosi dei guasti (2003) Convegno Internazionale sulla Manutenzione degli Impianti Industriali, SMI'01, Bologna, 28 febbraio - 3 marzo.
  300. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Sebastianelli, S., Diagnosis of gas turbine operating state in natural gas compression plants, (2000) Condition-Based Maintenance for Highly Engineered Systems Symposium, Pisa, pp. 1-13.

    Articoli in rivista nazionale

  301. Aldi, N., Casari, N., Dainese, D., Fabbri, E., Munari, E., Occari, M., Pinelli, M., Randi, S., Spina, P.R., Suman, A., Mazzanti, V., Mollica, F., Buratto, C., Studio del comportamento di pompe centrifughe con fluidi Non Newtoniani (2018) La Termotecnica, aprile 2018.
  302. Ancona, M. A., Bianchi, M., Branchini, L., De Pascale, A., Melino, F., Orlandini, V., Peretto, A., Ottaviano, S., Pinelli, M., Spina, P.R., Suman, A., Zampieri, G., Realizzazione di un banco prova per la caratterizzazione sperimentale di un sistema energetico micro-ORC (2017) La Termotecnica, gennaio-febbraio 2017.
  303. Fortini, F., Suman, A., Munari, E., Pinelli, M. Acquati, F., Banco di misura per le prestazioni di un’elettropompa centrifuga: analisi disaccoppiate dei componenti motore e pompa (2015) Controllo e Misura, Anno 3, n. 5, pp. 52-55.
  304. Pinelli, M., Pirani, L., Vaccari, A., Gandolfi, N., CFD analysis of a Fluidized Bed Reactor for industrial application (2014) Newsletter EnginSoft, 11, Vol. 1, pp. 32-34.
  305. Pinelli, M., Vaccari, A., Numerical analysis of a micro gas turbine combustor fed by liquid fuel (2011) Newsletter EnginSoft, 8, Vol. 4, pp. 20-22.
  306. Macchioni, P., Pinelli, M., Una metodologia integrata mono-tridimensionale applicata alla progettazione di macchine idrauliche (2009) Ingegneria Ambientale, XXXVIII (12), pp. 599-611.
  307. Pinelli, M., Pompoli, F., Pilati, M.A., Tagliaferro, B., Meno rumore con l’inverter: studio delle emissioni acustiche in bruciatori industriali con e senza controllo della velocità di rotazione del ventilatore (2004) L’Installatore Italiano, 5, 5, pp. 78-82.
  308. Bettocchi, R., Pinelli, M., Venturini, M., Burgio, M., Spina, P. R., Studio di modelli neurali per la simulazione di turbogas (2004) Manutenzione, Anno XIV, n. 3, pp. 15-19.
  309. Bettocchi, R., Pinelli, M., Venturini, M., Burgio, M., Spina, P. R., Studio di modelli neurali per la simulazione di turbogas. Analisi e determinazione dello stato di salute di sistemi energetici mediante l’utilizzo di reti neurali (2004) Manutenzione, Anno XI, n. 4, pp. 25-34.
  310. Tagliaferro, B., Bettocchi, R., Pinelli, M., Analisi termofluidodinamica di caldaie a basse emissioni (2001) Pompe & Pumps, 7, pp. 25-30.
  311. Tagliaferro, B., Bettocchi, R., Pinelli, M., Analisi termofluidodinamica di caldaie a basse emissioni (2001) L’Installatore Europeo, 5, pp. 4-16.
  312. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Sebastianelli, S., Analisi dei dati storici di funzionamento di una turbina a gas per la diagnosi dei guasti (2001) Manutenzione, anno VIII, n.6, pp. 33-38.

    Articoli in atti di convegno nazionale con referee

  313. Colantuono, R., Friso, R., Mazzanti, M., Pinelli, M., Aviation and the EU ETS: an overview and a data-driven approach for carbon price prediction (2022) Italian Society of Transport and Logistics Economists, XXIV Scientific Meeting, “Transport, Tourism and Sustainable Development”, University of Insubria, Varese, September 8th and 9th September 2022-
  314. Suman, A., Pinelli, M., Non-contact measurement techniques to study the microsized particle adhesion phenomenon (2022) XXX AIVELA National Meeting, Niccolò Cusano University, Rome, 15-16 December 2022.
  315. Bettocchi R., Bolognesi S., Cavarzere A., Morini M., Pinelli M., Spina P. R., Vaccari A., Venturini M., Filiera di produzione dell’energia da olio vegetale (2011) Atti 66° Congresso Nazionale ATI, Rende, 6-9 settembre 2011.
  316. Pinelli, M., Cadorin, M., Vaccari, A., Massoli, P., Calabria, R., Chiariello, F., Bianchi, E., Analisi numerica e sperimentale delle prestazioni di un combustore di una micro turbina a gas alimentata con gas di sintesi (2010) Atti 65° Congresso Nazionale ATI, 13-17 settembre 2010.
  317. Cadorin, M., Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Analisi energetico-economica di sistemi innovativi per la micro-cogenerazione nel settore residenziale (2010) Atti 65° Congresso Nazionale ATI, Cagliari, 13-17 settembre 2010.
  318. Bettocchi, R., Morini, M., Pinelli, M., Spina, P.R., Torsello, G., Venturini, M., Iniezione d'acqua in compressori di turbine a gas: apparato sperimentale ed effetti sulle mappe di prestazione (2010) Atti 65° Congresso Nazionale ATI, Cagliari, 13-17 settembre 2010.
  319. Bettocchi, R., Caprara, C., Martelli, R., Minarelli, F., Morini, M., Pinelli, M., Venturini, M., Analisi agronomica e termoeconomica di filiere energetiche per la piccola cogenerazione distribuita in Emilia-Romagna (2010) Atti 65° Congresso Nazionale ATI, Cagliari, 13-17 settembre 2010.
  320. Morini, M., Pinelli, M., Spina, P. R., Venturini, M., Numerical simulation of fouling effects on compressor stage performance (2009) Atti 64° Congresso Nazionale ATI, L’Aquila, 8-11 settembre.
  321. Bettocchi, R., Bidini, G., Cadorin, M., De Pascale, A., Laranci, P., Peretto, A., Vaccari, A., Analisi CFD di una camera di combustione per microturbina alimentata con gas naturale e con syngas da biomasse (2009) Atti 64° Congresso Nazionale ATI, L’Aquila, 8-11 settembre.
  322. Bettocchi, R., Cadorin, M., Morini, M., Pinelli, M., Spina, P. R., Venturini, M., Energetic performance and profitability of energy systems fed by vegetable oils (2008) Atti 63° Congresso Nazionale ATI, Palermo, 23-26 settembre.
  323. Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Influence of fouling on compressor and turbine performance (2007) Atti 62° Congresso Nazionale ATI, Salerno, 12-15 settembre.
  324. Pinelli, M., Cadorin, M., Cenci, G., Spina, P.R., Microcogeneration with thermophotovoltaic (TPV) systems: thermodynamic analysis and preliminary evaluation of numerical modeling (2007) Atti 62° Congresso Nazionale ATI, Salerno, 12-15 settembre.
  325. Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Cadorin, M., Cenci, G., Morini, M., Evaluation of the profitability of cogenerative energy systems fed by biogas obtained through anaerobic digestion, (2007) Atti 62° Congresso Nazionale ATI, Salerno, 12-15 settembre.
  326. Bettocchi R., Pinelli M., Spina P. R., Venturini M., Cenci, G., Morini, M., Modellizzazione del processo di produzione dell’energia da biomasse (2006) Atti 61° Congresso Nazionale ATI, Perugia, 12-15 settembre.
  327. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Zanetta, G., Analisi della robustezza di modelli neurali utilizzati per la diagnostica funzionale di turbine a gas (2005) Atti 60° Congresso Nazionale ATI, Roma, 13-15 settembre 2005.
  328. Pinelli, M., Pompoli, F., Pilati, A. M., Tagliaferro, B., Studio delle emissioni acustiche in bruciatori industriali con e senza controllo della velocità di rotazione del ventilatore (2004) Atti 31° Congresso Nazionale dell’Associazione Italiana di Acustica, Venezia.
  329. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Gas turbine operating state determination by using neural network models (2004) Atti 59° Congresso Nazionale ATI, Genova, 14-17 settembre 2004.
  330. Pinelli, M., Bucci, G., Numerical investigation of different stack design solutions in a cogeneration power plant (2003) Atti 58° Congresso Nazionale ATI, Padova, 8-12 settembre 2003.
  331. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Burgio, M., Modelli neurali per la simulazione di turbogas, (2003) Atti 58° Congresso Nazionale ATI, Padova, 8-12 settembre 2003.
  332. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P. R., Bellagamba, S., Tirone, G., Procedura di calibrazione del programma per la diagnosi funzionale dei turbogas della centrale a ciclo combinato di La Spezia (2002) Atti 57° Congresso Nazionale ATI, Pisa, 17-20 settembre 2002.
  333. Pinelli, M., Venturini, M., Buzzoni, M., Banco prova per la caratterizzazione statica dinamica ed acustica di compressori (2002) Atti 57° Congresso Nazionale ATI, Pisa, 17-20 settembre 2002.
  334. Bettocchi, R., Pinelli, M., Spina, P. R., Venturini, M., A program for the evaluation of pollutant emissions in combined cycle power plants with fired heat recovery steam generator (2001) Atti 56° Congresso Nazionale ATI, Napoli, 10-14 settembre 2001.
  335. Bettocchi, R., Pinelli, M., Spina, P.R., Venturini, M., Analisi dei guasti nei turbogas (2000) Atti 55° Congresso Nazionale ATI, Bari-Matera, 15-20 settembre 2000.
  336. Pinelli, M., Venturini, M., Variazione delle grandezze caratteristiche dei turbogas a seguito di guasti (2000) Atti 55° Congresso Nazionale ATI, Bari-Matera, 15-20 settembre 2000.
  337. Pinelli, M., Casano, G., Piva, S., Solid-liquid phase-change heat transfer in a vertical cylinder heated from above (1999) Atti del XVII Congresso Nazionale UIT, Pisa.
  338. Bettocchi, R., Spina, P.R., Pinelli, M., Venturini, M., Influenza dell’incertezza di misura sulla determinazione dello stato di funzionamento di turbogas (1999) Atti 54° Congresso Nazionale ATI, L’Aquila, 14-17 settembre 1999.

    Articoli in atti di convegno nazionale senza referee

  339. Bettocchi R., Morini M., Pinelli M., Valutazione delle prestazioni di un ventilatore Sirocco trascinato da un motore diesel in macchine atomizzatrici (2012) Atti della Giornata di Studio in ricordo del Prof. Roberto Bettocchi - La ricerca nel campo dei sistemi energetici e delle macchine negli atenei dell'Emilia-Romagna, Cento (FE), p. 3-17, SGEditoriali, ISBN: 9788889884218.
  340. Bettocchi, R., Cavarzere, A., Morini, M., Pinelli, M., Spina, P.R., Vaccari, A., Venturini, M., Fuelling micro gas turbines with vegetable oils (2012) Atti della Giornata di Studio in ricordo del Prof. Roberto Bettocchi - La ricerca nel campo dei sistemi energetici e delle macchine negli atenei dell'Emilia-Romagna, Cento (FE), p. 121-137, SGEditoriali, ISBN: 9788889884218.
  341. Morini, M., Pinelli, M., Spina, P.R., Venturini, M., Optimal allocation of thermal, electric and cooling loads among generation technologies in household applications (2012) Atti della Giornata di Studio in ricordo del Prof. Roberto Bettocchi - La ricerca nel campo dei sistemi energetici e delle macchine negli atenei dell'Emilia-Romagna, Cento (FE), p. 31-46, SGEditoriali, ISBN: 9788889884218.
  342. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Tecniche per il rilevamento e l’isolamento dei guasti ai sensori di misura (2004) Atti XXI Congresso Nazionale A.I.MAN., Milano.
  343. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Sebastianelli, S., Bezzi, F., Sviluppo di un sistema software per il monitoraggio e la diagnostica di turbogas (2002) Atti Convegno Nazionale A.I.MAN 2002, Ferrara.
  344. Bettocchi R., Pinelli M., Venturini M., Applicazione di una metodologia di diagnosi su turbogas in impianti combinati gas-vapore (2001) Atti X Convegno Nazionale "Tecnologie e sistemi energetici", Genova.
  345. Bettocchi, R., Pinelli, M., Venturini, M., Spina, P.R., Sebastianelli, S., Analisi diagnostiche di turbogas per la compressione del gas naturale (2000) Atti Convegno Nazionale A.I.MAN 2000, Ferrara.

    Abstracts in rivista o in convegno internazionale

  346. Buratto, C., Pinelli, M., Spina, P.R., Verga, C., Analysis of centrifugal pumps with high viscous and Non-Newtonian fluid: literature review and numerical modelling (2014) 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2014.

  347. Mattiuz, A, Long, Q, Koenig, C.S., Collins, M.W., Pinelli, M, Stress analysis in multicomponent plaque of human carotid artery models (2006) Journal of Biomechanics, Abstracts 5th World Congress of Biomechanics, Munich, Germany, 39(Supp. 1): S400.
  348. Rinaldo, V, Long, Q, Koenig, C.S, Das S., Collins, M.W., Pinelli, M., Numerical study of blood flow in the arteries in circle of Willis on patient with carotid artery stenosis (2006) Journal of Biomechanics, Abstracts 5th World Congress of Biomechanics, Munich, Germamy, 39(Supp. 1): S432.

    Pre-print

  349. Pinelli, M., Venturini, M., Analisi dell’influenza dei guasti su turbogas (1999) Quaderni del Dipartimento di Ingegneria, ING/083, Università di Ferrara, Ferrara.

Ultimi avvisi

Al momento non sono presenti avvisi.

RSS