Foto del docente

Giangiacomo Minak

Professore associato

Dipartimento di Ingegneria Industriale

Settore scientifico disciplinare: IIND-03/A Progettazione meccanica e costruzione di macchine

Coordinatore del Corso di Laurea Magistrale in Mechanical Engineering for Sustainability

Pubblicazioni

Gandhi, Yogesh; Aragón, Alejandro M.; Norato, Julián; Minak, Giangiacomo, A geometry projection method for the topology optimization of additively manufactured variable-stiffness composite laminates, «COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING», 2025, 435, Article number: 117663, pp. 1 - 21 [articolo]Open Access

Papavassiliou, Alessandro; Pavlovic, Ana; Minak, Giangiacomo, Crashworthiness investigation on a Carbon Fiber Reinforced Plastic solar vehicle, «COMPOSITE STRUCTURES», 2024, 340, Article number: 118147, pp. 1 - 14 [articolo]Open Access

Pavlovic, A.; Minak, G., Numerical Investigation of Low-Velocity Ice Impact on a Composite Ship Hull Using an FEM/SPH Formulation, «APPLIED SCIENCES», 2024, 14, Article number: 7679, pp. 1 - 17 [articolo]Open Access

Sinđelić V.; Nikolić A.; Minak G.; Bogojević N.; Ćirić Kostić S., An improved 2D arc-star-shaped structure with negative Poisson's ratio: In-plane analysis, «MATERIALS TODAY COMMUNICATIONS», 2023, 37, pp. 1 - 12 [articolo]Open Access

Pavlovic A.; Minak G., FEM-SPH Numerical Simulation of Impact Loading on Floating Laminates, «JOURNAL OF MARINE SCIENCE AND ENGINEERING», 2023, 11, Article number: 1590, pp. 1 - 17 [articolo]Open Access

Spignoli, Nicola; Minak, Giangiacomo, Influence on Fatigue Strength of Post-Process Treatments on Thin-Walled AlSi10Mg Structures Made by Additive Manufacturing, «METALS», 2023, 13, Article number: 126, pp. 1 - 12 [articolo]Open Access

R. Panciroli, M. Ahmadi, M. Fotohui, G .Minak, Low-Velocity Impact on preloaded and curved laminates, in: Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Manchester, Woodhead Publishing Series in Composites Science and Engineering, 2023, pp. 121 - 140 [capitolo di libro]

Minak G., Solar Energy-Powered Boats: State of the Art and Perspectives, «JOURNAL OF MARINE SCIENCE AND ENGINEERING», 2023, 11, Article number: 1519, pp. 1 - 18 [articolo]Open Access

Gandhi, Y.; Minak, G., A Review on Topology Optimization Strategies for Additively Manufactured Continuous Fiber-Reinforced Composite Structures, «APPLIED SCIENCES», 2022, 12, Article number: 11211, pp. 1 - 25 [articolo]Open Access

G. Minak; Ana Pavlovic, PROGETTO DI UNA SOSPENSIONE POSTERIORE IN MATERIALE COMPOSITO PER VEICOLI ELETTRICI, in: Atti Del 51° CONVEGNO NAZIONALE AIAS – ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI, 7-10 SETTEMBRE 2022, 2022, pp. 1 - 9 (atti di: 51° CONVEGNO NAZIONALE AIAS, Vicenza, 7-10 settembre 2022) [Contributo in Atti di convegno]

Panciroli, Riccardo; Minak, Giangiacomo, Cavity Formation during Asymmetric Water Entry of Rigid Bodies, «APPLIED SCIENCES», 2021, 11, Article number: 11052029, pp. 1 - 14 [articolo]Open Access

VANNUCCHI DE CAMARGO, Felipe; Fernandes, E. D. S.; Ten Caten, C. S.; Alves, A. K.; Bergmann, C. P.; Minak, G., In‐plane shear strength of single‐lap co‐cured joints of self‐reinforced polyethylene composites, «MATERIALS», 2021, 14, Article number: 1517, pp. 1 - 23 [articolo]Open Access

Brugo, Tommaso Maria; Campione, Ivo; Minak, Giangiacomo, Investigation by Digital Image Correlation of Mixed-Mode I and II Fracture Behavior of Polymeric IASCB Specimens with Additive Manufactured Crack-Like Notch, «MATERIALS», 2021, 14, Article number: 1084, pp. 1 - 15 [articolo]Open Access

Machry, Thays; Venturini, Janio; de Camargo, Felipe V.; Bergmann, Carlos P.; Al-Qureshi, Hazim A.; Minak, Giangiacomo, Manufacturing of Fiber-Reinforced Ceramic Matrix Composites by Filament Winding and Freeze Gelation, in: Encyclopedia of Materials: Composites, Amsterdam, Elsevier, 2021, pp. 37 - 47 [capitolo di libro]

Brevetto n. IT202100030248, SISTEMA DI SOSPENSIONE E ASSALE VEICOLARE MIGLIORATI, E RELATIVO VEICOLO ELETTRICO.

Ultimi avvisi

Al momento non sono presenti avvisi.