86462 - POWERTRAIN TESTING, CALIBRATION AND HOMOLOGATION

Anno Accademico 2022/2023

  • Docente: Nicolò Cavina
  • Crediti formativi: 6
  • SSD: ING-IND/08
  • Lingua di insegnamento: Inglese
  • Modalità didattica: Convenzionale - Lezioni in presenza
  • Campus: Bologna
  • Corso: Laurea Magistrale in Advanced Automotive Engineering (cod. 9239)

    Valido anche per Laurea Magistrale in Ingegneria meccanica (cod. 5724)

Conoscenze e abilità da conseguire

The main objective of the Course is to introduce and discuss the main aspects related to an internal combustion engine test cell, to allow the students to become familiar with such environment and its applications. An introductory part will be provided to analyze the following topics: - Main theoretical aspects regarding homologation procedures and regulations; - Main engine sensors and actuators; - Modern calibration methodologies such as Design Of Experiments; - Main experimental activities and facilities used during the engine and vehicle development process. During the course, students spend several hours in the test cell, conducting different types of tests (starting from standard power curves to calibration-oriented tests, or tests focused on combustion analysis, ...). The rest of the time is spent in the classroom/computer room, introducing the experimental activity and analyzing the data that have been acquired, with a calibration-oriented approach.

Contenuti

  • Engine and dynamometer installation. The main types of dynamometers and the corresponding criteria for choosing the right one.
  • Sensors and instrumentation to be used in a test cell environment.
  • Exhaust gas emissions measurement and control.
  • Homologation procedures and regulations.
  • Signal acquisition systems and signal post-processing systems. Data analysis and interpretation.
  • Engine calibration. Design of Experiments methodology and test cell automation systems.
The class lectures will offer an introduction to several experimental test sessions that will be carried out in the engine test cell. During such experimental activity, calibration procedures will be demonstrated, and both nominal and faulty conditions will be tested on the engine, to analyze the engine control system performance and the main diagnostic functions implemented in the Engine Control Unit.

Testi/Bibliografia

Handouts concerning some elements of the program, exercises and examples, are available on AMS Campus. The following list presents the main publications that could be used by the students to deepen specific topics, or to complement their background on the subject.

  • "Introduction to modeling and control of internal combustion engine systems", L. Guzzella, C. H. Onder, Springer-Verlag, 2004.
  • “Engine Testing", M. Plynt, A. Martyr, Ed. Butterworth-Heinemann, 2007.

Metodi didattici

The course is held in English. The theoretical aspects of engine testing are introduced during class lectures, while the experimental activity in the test cell should provide hands-on applications of engine-dynamometer control and measurement systems. Finally, Matlab-based sessions will introduce the students to data pre- and post-processing, with a calibration-oriented approach (possibly, each student will use a personal computer running Matlab during such sessions). The educational material is uploaded before each lecture on the University online platform.

Attendance is strongly recommended for better learning of concepts and methodologies, but does not affect the final evaluation process.

As concerns the teaching methods of this course unit, all students must attend Module 1, 2 [https://www.unibo.it/en/services-and-opportunities/health-and-assistance/health-and-safety/online-course-on-health-and-safety-in-study-and-internship-areas] online, while Module 3 on health and safety is to be attended in class. Information about Module 3 attendance schedule is available on the website of your degree programme

 

PLEASE NOTE THAT ALL THE STUDENTS ARE REQUIRED TO CARRY OUT TRAINING ON SAFETY BEFORE ATTENDING THE COURSE, IN A COMPULSORY AND PREVENTIVE MANNER.

Modalità di verifica e valutazione dell'apprendimento

Learning assessment is finalized through a final oral examination, which takes place for about 60-90 minutes, answering a few questions in writing (diagrams, equations, diagrams, drawings, ...) and then discussing them with the instructor. The student can also produce a report about the analysis of experimental data acquired during test cell activity.

This test is intended to verify the student knowledge about the main subjects of the course. The final vote takes into account the ability to solve problems in the matters discussed during the lectures, and the acquisition of engineering methodologies for developing, testing and calibrating automotive powertrains.

The evaluation, expressed in thirtieths, will be higher the more the student is:

  • autonomous in articulating answers to the questions and mathematical procedures for data pre- and post-processing;
  • exhaustive in explaining the topics and the experimental approach to powertrain testing;
  • capable of synthesizing the most important parameters and relationships through graphs, sketches, and schematics.
During the exam, students are not allowed to use the lecture notes or other material and they are required to have an identity document.

Strumenti a supporto della didattica

Slides and audio-visual supports will be used throughout the course.

Class notes will be distributed to the students through the University online platform before each lecture.

Also, the experimental data and the scripts that will be acquired and developed during the test-cell and Matlab-based sessions will be made available to the students.

Orario di ricevimento

Consulta il sito web di Nicolò Cavina

SDGs

Energia pulita e accessibile Lotta contro il cambiamento climatico

L'insegnamento contribuisce al perseguimento degli Obiettivi di Sviluppo Sostenibile dell'Agenda 2030 dell'ONU.